Exploration of Pipeline Filling Methods for High-pressure Water Descaling System

Yang Dezheng; Ao Feng; Yang Yiguang

doi:doi:10.11648/j.ijmpem.20190401.12

| Peer-Reviewed

Exploration of Pipeline Filling Methods for High-pressure Water Descaling System

Yang Dezheng, Ao Feng, Yang Yiguang

Published in International Journal of Mineral Processing and Extractive Metallurgy (Volume 4, Issue 1)

Received: 23 December 2018 Accepted: 5 March 2019 Published: 28 March 2019

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

High-pressure water descaling is an important equipment in hot rolling of steel plant. Filling post pipelines of descaling valve during the interval of descaling operation can effectively protect the system equipment. Pipeline filling can prevent water loss from becoming empty pipe and forming air collection, thus to eliminate pipeline impact and vibration caused by descaling operation, and to avoid damage of pipeline equipment. There are two methods of water filling: low-pressure filling and high-pressure filling. Non-energy-saving descaling system, i.e. the system of mixed water supply of descaling pump and accumulator, and the descaling system of direct water supply of descaling pump, should choose high-pressure filling, which consumes little energy of good reliability and safety; while the energy-saving descaling system, i.e. the system of mixed water supply of descaling pump and accumulator, should choose low-pressure filling, which has lower energy consumption and remarkable energy-saving effect, but with relatively poor system safety.

Published in	International Journal of Mineral Processing and Extractive Metallurgy (Volume 4, Issue 1)
DOI	10.11648/j.ijmpem.20190401.12
Page(s)	7-13
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

Descaling System, Accumulator, Pipeline Filling, Descaling Valve, Water Filling Valve

References

[1]	Cui Jianli, Application of Segmental Descaling In Hot Continuous Rolling, China Metallurgy 2012(6):45.
[2]	Xie Changrui, Development of High Pressure & Low Flow Descaling System for Steckel Mill of Nangang, Steel Rolling, 2011(6):56.
[3]	You Fei, Effect of Accumulator Parameters on Water Hammer in High-pressure Water Descaling System, Journal of Water Resources & Water Engineering, 2013 (10): 157.
[4]	Zhu Haijun, Optimum Selection of High-pressure Water Descaling Nozzle for Stainless Steel Billet, Steel Rolling, 2015(3):51.
[5]	Yang Bo, Frequent Failure Analysis & Countermeasures of High-pressure Water Descaling System, China Metallurgy, 2013 (11):49.
[6]	Jin Chenghu, Application Analysis of High-pressure Water Descaling System in A 1780mm Hot Rolling, Fluid Drive And Control, 2014(7):42.
[7]	Guo Weidong, Optimization of Descaling Device for Wide & Heavy Plate of Hansteel, Steel Rolling, 2014(2):38.
[8]	Li Jingyang, Application of High Voltage Inverter in Descaling System of Baosteel Hot Rolling, China Metallurgy, 2012(7):38.
[9]	Li Yufeng, Energy-Saving Renovation of High-Pressure Water Descaling Pump System in Hot Strip Mill, China Metallurgy, 2015(3):41.
[10]	Han Qinggang, Numerical Calculation of High-pressure Water Descaling System for Hot Rolling Strip, Steel Rolling 2010(4):40.

Cite This Article

Plain Text BibTeX RIS

APA Style

Yang Dezheng, Ao Feng, Yang Yiguang. (2019). Exploration of Pipeline Filling Methods for High-pressure Water Descaling System. International Journal of Mineral Processing and Extractive Metallurgy, 4(1), 7-13. https://doi.org/10.11648/j.ijmpem.20190401.12

Copy | Download

ACS Style

Yang Dezheng; Ao Feng; Yang Yiguang. Exploration of Pipeline Filling Methods for High-pressure Water Descaling System. Int. J. Miner. Process. Extr. Metall. 2019, 4(1), 7-13. doi: 10.11648/j.ijmpem.20190401.12

Copy | Download

AMA Style

Yang Dezheng, Ao Feng, Yang Yiguang. Exploration of Pipeline Filling Methods for High-pressure Water Descaling System. Int J Miner Process Extr Metall. 2019;4(1):7-13. doi: 10.11648/j.ijmpem.20190401.12

Copy | Download

@article{10.11648/j.ijmpem.20190401.12,
  author = {Yang Dezheng and Ao Feng and Yang Yiguang},
  title = {Exploration of Pipeline Filling Methods for High-pressure Water Descaling System},
  journal = {International Journal of Mineral Processing and Extractive Metallurgy},
  volume = {4},
  number = {1},
  pages = {7-13},
  doi = {10.11648/j.ijmpem.20190401.12},
  url = {https://doi.org/10.11648/j.ijmpem.20190401.12},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijmpem.20190401.12},
  abstract = {High-pressure water descaling is an important equipment in hot rolling of steel plant. Filling post pipelines of descaling valve during the interval of descaling operation can effectively protect the system equipment. Pipeline filling can prevent water loss from becoming empty pipe and forming air collection, thus to eliminate pipeline impact and vibration caused by descaling operation, and to avoid damage of pipeline equipment. There are two methods of water filling: low-pressure filling and high-pressure filling. Non-energy-saving descaling system, i.e. the system of mixed water supply of descaling pump and accumulator, and the descaling system of direct water supply of descaling pump, should choose high-pressure filling, which consumes little energy of good reliability and safety; while the energy-saving descaling system, i.e. the system of mixed water supply of descaling pump and accumulator, should choose low-pressure filling, which has lower energy consumption and remarkable energy-saving effect, but with relatively poor system safety.},
 year = {2019}
}

Copy | Download

TY  - JOUR
T1  - Exploration of Pipeline Filling Methods for High-pressure Water Descaling System
AU  - Yang Dezheng
AU  - Ao Feng
AU  - Yang Yiguang
Y1  - 2019/03/28
PY  - 2019
N1  - https://doi.org/10.11648/j.ijmpem.20190401.12
DO  - 10.11648/j.ijmpem.20190401.12
T2  - International Journal of Mineral Processing and Extractive Metallurgy
JF  - International Journal of Mineral Processing and Extractive Metallurgy
JO  - International Journal of Mineral Processing and Extractive Metallurgy
SP  - 7
EP  - 13
PB  - Science Publishing Group
SN  - 2575-1859
UR  - https://doi.org/10.11648/j.ijmpem.20190401.12
AB  - High-pressure water descaling is an important equipment in hot rolling of steel plant. Filling post pipelines of descaling valve during the interval of descaling operation can effectively protect the system equipment. Pipeline filling can prevent water loss from becoming empty pipe and forming air collection, thus to eliminate pipeline impact and vibration caused by descaling operation, and to avoid damage of pipeline equipment. There are two methods of water filling: low-pressure filling and high-pressure filling. Non-energy-saving descaling system, i.e. the system of mixed water supply of descaling pump and accumulator, and the descaling system of direct water supply of descaling pump, should choose high-pressure filling, which consumes little energy of good reliability and safety; while the energy-saving descaling system, i.e. the system of mixed water supply of descaling pump and accumulator, should choose low-pressure filling, which has lower energy consumption and remarkable energy-saving effect, but with relatively poor system safety.
VL  - 4
IS  - 1
ER  -

Copy | Download

Author Information

Yang Dezheng

Chongqing Pump Industry Co., Ltd.-National Enterprise Technology Center, Chongqing, China
Ao Feng

Chongqing Pump Industry Co., Ltd.-National Enterprise Technology Center, Chongqing, China
Yang Yiguang

Chongqing Pump Industry Co., Ltd.-National Enterprise Technology Center, Chongqing, China

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Yang Dezheng, Ao Feng, Yang Yiguang. (2019). Exploration of Pipeline Filling Methods for High-pressure Water Descaling System. International Journal of Mineral Processing and Extractive Metallurgy, 4(1), 7-13. https://doi.org/10.11648/j.ijmpem.20190401.12

Copy | Download

ACS Style

Yang Dezheng; Ao Feng; Yang Yiguang. Exploration of Pipeline Filling Methods for High-pressure Water Descaling System. Int. J. Miner. Process. Extr. Metall. 2019, 4(1), 7-13. doi: 10.11648/j.ijmpem.20190401.12

Copy | Download

AMA Style

Yang Dezheng, Ao Feng, Yang Yiguang. Exploration of Pipeline Filling Methods for High-pressure Water Descaling System. Int J Miner Process Extr Metall. 2019;4(1):7-13. doi: 10.11648/j.ijmpem.20190401.12

Copy | Download

@article{10.11648/j.ijmpem.20190401.12,
  author = {Yang Dezheng and Ao Feng and Yang Yiguang},
  title = {Exploration of Pipeline Filling Methods for High-pressure Water Descaling System},
  journal = {International Journal of Mineral Processing and Extractive Metallurgy},
  volume = {4},
  number = {1},
  pages = {7-13},
  doi = {10.11648/j.ijmpem.20190401.12},
  url = {https://doi.org/10.11648/j.ijmpem.20190401.12},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijmpem.20190401.12},
  abstract = {High-pressure water descaling is an important equipment in hot rolling of steel plant. Filling post pipelines of descaling valve during the interval of descaling operation can effectively protect the system equipment. Pipeline filling can prevent water loss from becoming empty pipe and forming air collection, thus to eliminate pipeline impact and vibration caused by descaling operation, and to avoid damage of pipeline equipment. There are two methods of water filling: low-pressure filling and high-pressure filling. Non-energy-saving descaling system, i.e. the system of mixed water supply of descaling pump and accumulator, and the descaling system of direct water supply of descaling pump, should choose high-pressure filling, which consumes little energy of good reliability and safety; while the energy-saving descaling system, i.e. the system of mixed water supply of descaling pump and accumulator, should choose low-pressure filling, which has lower energy consumption and remarkable energy-saving effect, but with relatively poor system safety.},
 year = {2019}
}

Copy | Download

TY  - JOUR
T1  - Exploration of Pipeline Filling Methods for High-pressure Water Descaling System
AU  - Yang Dezheng
AU  - Ao Feng
AU  - Yang Yiguang
Y1  - 2019/03/28
PY  - 2019
N1  - https://doi.org/10.11648/j.ijmpem.20190401.12
DO  - 10.11648/j.ijmpem.20190401.12
T2  - International Journal of Mineral Processing and Extractive Metallurgy
JF  - International Journal of Mineral Processing and Extractive Metallurgy
JO  - International Journal of Mineral Processing and Extractive Metallurgy
SP  - 7
EP  - 13
PB  - Science Publishing Group
SN  - 2575-1859
UR  - https://doi.org/10.11648/j.ijmpem.20190401.12
AB  - High-pressure water descaling is an important equipment in hot rolling of steel plant. Filling post pipelines of descaling valve during the interval of descaling operation can effectively protect the system equipment. Pipeline filling can prevent water loss from becoming empty pipe and forming air collection, thus to eliminate pipeline impact and vibration caused by descaling operation, and to avoid damage of pipeline equipment. There are two methods of water filling: low-pressure filling and high-pressure filling. Non-energy-saving descaling system, i.e. the system of mixed water supply of descaling pump and accumulator, and the descaling system of direct water supply of descaling pump, should choose high-pressure filling, which consumes little energy of good reliability and safety; while the energy-saving descaling system, i.e. the system of mixed water supply of descaling pump and accumulator, should choose low-pressure filling, which has lower energy consumption and remarkable energy-saving effect, but with relatively poor system safety.
VL  - 4
IS  - 1
ER  -

Copy | Download