Industrial Engineering

| Peer-Reviewed |

Clay Adsorption Perspective on Petroleum Refining Industry

Received: Sep. 13, 2018    Accepted: Sep. 25, 2018    Published: Oct. 25, 2018
Views:       Downloads:

Share This Article

Abstract

Clays are the most utilized minerals and considered very efficient and economical sorbents according to their chemical and physical properties. Clays are enjoying rapid popularity in the petroleum refining industry for the various processes such as adsorption and separation. Removal of many components such as sulfur, heavy metals, colors and separation of different hydrocarbon groups of crude oil and petroleum fractions can be carried out by clay adsorption. The present review summarizes the using of clay as adsorbent in several petroleum refining processes such as desulphurization, deasphalting, waste oil recovery, bleaching, corrosion reduction, heavy metals removal and other. One of the simplest, easiest and efficient separation processes used in different industries is adsorption. Review results show that different types of clay are obtainable and used in many applications. Clay adsorption can be enhanced the treatment and finishing of crude oils and petroleum fractions through several modifications such as metals impregnation, acid and thermal activations. Bentonite clays promote the highest adsorption capacity to remove sulfur and a high bleaching potential. Attapulgite clay is effective in decolorization and neutralization any petroleum oil. Impregnation of NiO nanoparticles into kaolin improves the asphaltenes adsorption. Several modified as well as unmodified clays promote the highest removal efficiency of Ni and V from crude oil. Additionally, the adsorption pre-treatment affects the reduction in corrosion yields and the corrosion rate.

DOI 10.11648/j.ie.20180201.13
Published in Industrial Engineering ( Volume 2, Issue 1, June 2018 )
Page(s) 19-25
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

Clay, Adsorption, Petroleum Refining Industry, Desulfurization, Waste Oil Recovery, Finishing Process, Deasphalting, Bleaching

References
[1] Speight J. G., The Chemistry and Technology of Petroleum, 5th Ed, CRC Press, ISBN 9781439873908, 2014.
[2] Murray H. H., Applied Clay Mineralogy, Elsevier, 1st Ed, ISBN-13: 978-0-444-51701-2, 2007.
[3] Emam E. A., ARPN J. of Sci. and Tech., 2013, 3 (4), 356-375.
[4] Zadaka-Amir D., Bleiman N., Mishael Y. G., Microporous and Mesoporous Materials, 2013, 169, 153-159.
[5] Emam E. A., American J. of Environmental Protection, 2013, 2 (6), 161-169.
[6] Pillon L. Z., Surface activity of petroleum derived lubricants, Taylor and Francis Group, LLC, ISBN-13: 978-1-4398-0341-7, 2011.
[7] Ishaq M., Sultan S., Ahmad I., Ullah H., Yaseen M., Amir A., J. of Saudi Chem. Society, 2017, 21, 143–151.
[8] Gawande P., Kaware Dr. J., International Research J. of Eng. and Technology, 2016, 3 Issue 12, 337-340.
[9] Shakirllah M., Ahamad W., Ahamad I., Mishaq, Khan M. I., Chil. Chem. Soc., 2012, 57, 1375-1380.
[10] Dudasova D., Simon S., Hemmingsen P. V., Sjöblom J., Colloids and Surfaces A: Physicochemical and Eng. Aspects, 2008, 317, 1-9.
[11] Karim A. R., Jubrail K. J., Abdullah M. A., J. of Zankoy Sulaimani, 2005, 8 (1) Part A, 127-140.
[12] Kukwa D. T., Ikyereve R. E., Ikese C. O., The International J. of Eng. and Sci., 2014, 3, Issue 4, 13-20.
[13] Xiaohui L., Rui M., Fenglin H., Yan L., China Pet. Processing and Petrochemical Tech., 2017, 19 (1), 123-134.
[14] Emam E. A., Shoaib A. M., ARPN J. of Sci. and Tech., 2012, 2 (11), 1034-1041.
[15] Rajakovic V., Aleksic G., Rajakovic L., J. Hazard. Mater., 2008, 154, 558–563.
[16] Rajakovic V., Aleksic G., Radetic M., Rajakovic L., J. Hazard. Mater., 2007, 143 494–499.
[17] Wan M.-W., Sychoi A. E., Park H.-S., Roces S., Dugos N., International J. of Advances in Sci. Eng. and Tech., 2017, 5, Issue 3, 72-75.
[18] Patil M. S., Bhattacharyulu Y. C., Kulkarni S. R., J. of Eng. Research and Studies, 2011, II, 81-98.
[19] Daware G. B., Kulkarni A. B., Rajput A. A., International J. of Innovative and Emerging Research in Eng., 2015, 2, Issue 6, 69-73.
[20] Gawande P., Kaware Dr. J., International J. of Scientific Eng. and Research, 2017, 5, Issue 5, 37-42.
[21] Ibrahim N. K., Aljanabi S. K., Eng. & Tech. J., 2015, 33, 1901-1916.
[22] Younis M. K., Simo S. M., International Research J. of Pure & Applied Chemistry, 2015, 1-7.
[23] Xiaolin T., Zheting L., Li S., China Pet. Processing and Petrochemical Tech., 2011, 13 (3), 16-20.
[24] Baia L. V., Souza W. C., de Souza R. J. F., Veloso C. O., Chiaro S. S. X., Figueiredo M. A. G., Energy & Fuels, 2017, 31 (11), 11731–11742.
[25] Ahmad S., Ahmad M. I., Naeem K., Humayun M., Zaeem S.-E., Faheem F., Chem. Ind. Chem. Eng. Q., 2016, 22 (3), 249-254.
[26] Tang X.-L., Meng X., Shi L., Ind. Eng. Chem. Res., 2011, 50, 7527–7533.
[27] Yi D., Huang H., Shi L., Korean Chem. Soc., 2013, 34 (3), 776-782.
[28] Ahmad W., Ahmad I., Ishaq M., Ihsan K., Arabian J. of Chemstry, 2017, 10, 3263–3269.
[29] Xinguo X., Jiling Z., Ruiyu J., Qi X., China Pet. Processing and Petrochemical Tech., 2014, 16 (3), 63-68.
[30] Mikhail S., Zaki T., Khalil L., Applied Catalysis A: General, 2002, 227, 265–278.
[31] Miller K. E., Bruno T. J., J. of Chromatography A, 2002, 975, 311–318.
[32] Mostafa H. Y, El-Shamy E. A., Farag A. S., Kandile N. G., Egyptian J. of Petroleum, 2013, 22, 471–479.
[33] Sequeira A. Jr., Lubricant Base Oil and Wax Processing, Marcel Dekker, Inc., New York, 1994.
[34] Masliyah J. H., Xu Z., Czarnecki J. A., Dabros M., Handbook on Theory and Practice of Bitumen Recovery from Athabasca Oil Sands, Kingsley Knowledge Pub., Cochrane, Alberta, c2011-201.
[35] Akbarzadeh K., Hammami A., Kharrat A., Zhang D., Allenson S., et al. Oilfield Review, 2007, 19 (2), 22-43.
[36] Abdul-Raouf M. E., Crude Oil Emulsions- Composition Stability and Characterization, ISBN 978-953-51-0220-5, Publisher InTech., 2012.
[37] Aziz B. K., Abdullah M. A., Jubrael K. J., Asian J. of Chemistry, 2011, 23 (6), 2449-2455.
[38] Hassan A., Lopez-Linares F., Nassar N. N., Carbognani-Arambarri L., Pereira-Almao P., Catalysis Today, 2013, 207, 112-118.
[39] Dean K. R., McAtee Jr J. L., Applied Clay Sci., 1986, 1 (4), 313-319.
[40] Bantignies J.-L., Cartier dit Moulin C., Dexpert H., J. of Pet. Sci. and Eng., 1998, 20, 233–237.
[41] Nassar N. N., Energy & Fuels, 2010, 24 (4), 4116-4122.
[42] Tsiamis A., Taylor S. E., Energy & Fuels, 2017, 31 (10), 10576–10587.
[43] Al-Jabari M., Husien M., Proceedings of 3rd ICCE 18-20 Nov., Kuwait, 2007.
[44] Hatami A. M., Sabour M. R., Amiri A., Global J. Environ. Sci. Manage., 2018, 4 (1), 9-18.
[45] Díaz F. R. V., Santos P. D. S., Química Nova, 2001, 24 (3) 345-353.
[46] Ismadji S., Soetaredjo F. E., Ayucitra A., Clay materials for environmental remediation. Springer Int. Pub., ISBN: 978-3-319-16711-4, 2015, 5-37.
[47] Yildiz N., Aktas Z., Calimi A., Particulate Sci. Technol., 2004, 22, 21-33.
[48] Silva J. P., Senna L. F. d., Materials Research, 2007, 10 (2), 219-225.
[49] Kukwa D. T., Ikyereve R. E., Adejo S. O., Ikese C. O., Chemistry and Materials Research, 2014, 6 (4), 115-121.
[50] Oduola M. K., Okwonna O. O., International J. of Eng. Research & Sci., 2016, 2, Issue-5, 113-123.
[51] Dettman H. D., Li N., Luo J., CORROSION 2009, Atlanta, GA, March 22−26, 2009.
[52] Fahim M. A., Al-Sahhaf T. A., Elkilani A. S., Fundamentals of Petroleum Refining 1st Ed., Oxford, U. K.: Elsevier, 2010.
[53] Qu D., Zheng Y., Corrosion Sci., 2006, 48 (8), 1960-1985.
[54] Saad O. M., Gasmelseed G. A., Hamid A. H. M., J. of Applied and Industrial Sci., 2014, 2 (1), 14-18.
[55] Abu-Elella R., Ossman M. E., Farouq R., Abd-Elfatah M., International J. of Chem. and Biochemical Sci., 2015, 7, 57-67.
[56] Emam E. A., Shoaib A. M., Petroleum & Coal, 2013, 55 (3), 179-187.
[57] Singh C., Tiwari S., Yadav G., International J. of Research in Mechanical Eng. & Tech., 2017, 7, Issue 2, 130-133.
[58] Mohammed R. R., Ibrahim I. A. R., Taha A. H., McKay G., Chem. Eng. J., 2013, 220, 343-351.
[59] Kulkarni S. J., International J. of Pet. and Petrochemical Eng., 2017, 3, Issue 3, 37-40.
[60] Shivankar V., International J. of Chemistry Research, 2011, 2, Issue 2, 30-31.
[61] Udonne J. D., J. of Petroleum and Gas Eng., 2011, 2 (2), 12-19.
[62] Daham G. R., AbdulRazak A. A., Hamadi A. S., Mohammed A. A., Korean J. Chem. Eng., 2017, 34 (9), 2435-2444.
[63] Josiah P. N., Ikiensikimama S. S., Chem. Eng. research Bulletin, 2010, 14, 25-28.
[64] Ahmad I., Khan R., Ishaq M., Khan H., Ismail M., Gul K., Ahmad W., Energy & Fuels, 2016, 30 (1), 204-218.
Cite This Article
  • APA Style

    Eman Abdelwahab Emam. (2018). Clay Adsorption Perspective on Petroleum Refining Industry. Industrial Engineering, 2(1), 19-25. https://doi.org/10.11648/j.ie.20180201.13

    Copy | Download

    ACS Style

    Eman Abdelwahab Emam. Clay Adsorption Perspective on Petroleum Refining Industry. Ind. Eng. 2018, 2(1), 19-25. doi: 10.11648/j.ie.20180201.13

    Copy | Download

    AMA Style

    Eman Abdelwahab Emam. Clay Adsorption Perspective on Petroleum Refining Industry. Ind Eng. 2018;2(1):19-25. doi: 10.11648/j.ie.20180201.13

    Copy | Download

  • @article{10.11648/j.ie.20180201.13,
      author = {Eman Abdelwahab Emam},
      title = {Clay Adsorption Perspective on Petroleum Refining Industry},
      journal = {Industrial Engineering},
      volume = {2},
      number = {1},
      pages = {19-25},
      doi = {10.11648/j.ie.20180201.13},
      url = {https://doi.org/10.11648/j.ie.20180201.13},
      eprint = {https://download.sciencepg.com/pdf/10.11648.j.ie.20180201.13},
      abstract = {Clays are the most utilized minerals and considered very efficient and economical sorbents according to their chemical and physical properties. Clays are enjoying rapid popularity in the petroleum refining industry for the various processes such as adsorption and separation. Removal of many components such as sulfur, heavy metals, colors and separation of different hydrocarbon groups of crude oil and petroleum fractions can be carried out by clay adsorption. The present review summarizes the using of clay as adsorbent in several petroleum refining processes such as desulphurization, deasphalting, waste oil recovery, bleaching, corrosion reduction, heavy metals removal and other. One of the simplest, easiest and efficient separation processes used in different industries is adsorption. Review results show that different types of clay are obtainable and used in many applications. Clay adsorption can be enhanced the treatment and finishing of crude oils and petroleum fractions through several modifications such as metals impregnation, acid and thermal activations. Bentonite clays promote the highest adsorption capacity to remove sulfur and a high bleaching potential. Attapulgite clay is effective in decolorization and neutralization any petroleum oil. Impregnation of NiO nanoparticles into kaolin improves the asphaltenes adsorption. Several modified as well as unmodified clays promote the highest removal efficiency of Ni and V from crude oil. Additionally, the adsorption pre-treatment affects the reduction in corrosion yields and the corrosion rate.},
     year = {2018}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Clay Adsorption Perspective on Petroleum Refining Industry
    AU  - Eman Abdelwahab Emam
    Y1  - 2018/10/25
    PY  - 2018
    N1  - https://doi.org/10.11648/j.ie.20180201.13
    DO  - 10.11648/j.ie.20180201.13
    T2  - Industrial Engineering
    JF  - Industrial Engineering
    JO  - Industrial Engineering
    SP  - 19
    EP  - 25
    PB  - Science Publishing Group
    SN  - 2640-1118
    UR  - https://doi.org/10.11648/j.ie.20180201.13
    AB  - Clays are the most utilized minerals and considered very efficient and economical sorbents according to their chemical and physical properties. Clays are enjoying rapid popularity in the petroleum refining industry for the various processes such as adsorption and separation. Removal of many components such as sulfur, heavy metals, colors and separation of different hydrocarbon groups of crude oil and petroleum fractions can be carried out by clay adsorption. The present review summarizes the using of clay as adsorbent in several petroleum refining processes such as desulphurization, deasphalting, waste oil recovery, bleaching, corrosion reduction, heavy metals removal and other. One of the simplest, easiest and efficient separation processes used in different industries is adsorption. Review results show that different types of clay are obtainable and used in many applications. Clay adsorption can be enhanced the treatment and finishing of crude oils and petroleum fractions through several modifications such as metals impregnation, acid and thermal activations. Bentonite clays promote the highest adsorption capacity to remove sulfur and a high bleaching potential. Attapulgite clay is effective in decolorization and neutralization any petroleum oil. Impregnation of NiO nanoparticles into kaolin improves the asphaltenes adsorption. Several modified as well as unmodified clays promote the highest removal efficiency of Ni and V from crude oil. Additionally, the adsorption pre-treatment affects the reduction in corrosion yields and the corrosion rate.
    VL  - 2
    IS  - 1
    ER  - 

    Copy | Download

Author Information
  • Department of Petroleum Refining Eng. and Petrochemicals, Faculty of Petroleum and Mining Eng., Suez University, Suez, Egypt

  • Section