Applied Engineering

Archive

Submit a Manuscript

Publishing with us to make your research visible to the widest possible audience.

Propose a Special Issue

Building a community of authors and readers to discuss the latest research and develop new ideas.

Numerical Simulation of Heat and Moisture Transfer in Corrugated Walls Dryer

The primary goal of the current work is to model heat and mass transfer during mango drying in a wavy airflow dryer. By modifying the dryer walls, we were able to produce the undulating airflow (with V-shaped obstacles). With convective boundary conditions applied to all product surfaces, the explicit finite difference approach was used to study heat and mass exchanges in two dimensions during the drying of mango slices. During drying, the transfer coefficients are thought to fluctuate. Using EasyCFD software, the external flow, temperature, velocity, and pressure fields were then analyzed. This provided the profile of the heat transfer coefficient. These profiles were then utilized to calculate the mass transfer coefficient using the Shilton-Colburn analogy. Moreover, the code created to determine the heat and mass transfer coefficients in the product was used to derive the evolution of temperature and moisture content over time. The results allowed for the discovery of a new air flow in dryers called an undular flow and demonstrated how modifying the drying air stream enhanced heat transfer efficiency. By changing the air flow in the dryer, it was possible to achieve heat transfer coefficients ranging from 47.55 W/m2K to 357.38 W/m2K and mass transfer coefficients of 3.21 x 10-5 to 3.21 x 10-4 m2/s. When the outcomes of this investigation were compared to experimental results from the literature (under identical drying circumstances), a reasonable level of adequacy was discovered.

Numerical Simulation, Drying, Dryer, Corrugated Walls, Convective Coefficients

APA Style

Balbine Matuam, Nicolas Gnepie, Jaures Fotsa, Abraham Tetang, Marcel Edoun, et al. (2023). Numerical Simulation of Heat and Moisture Transfer in Corrugated Walls Dryer. Applied Engineering, 7(1), 1-10. https://doi.org/10.11648/j.ae.20230701.11

ACS Style

Balbine Matuam; Nicolas Gnepie; Jaures Fotsa; Abraham Tetang; Marcel Edoun, et al. Numerical Simulation of Heat and Moisture Transfer in Corrugated Walls Dryer. Appl. Eng. 2023, 7(1), 1-10. doi: 10.11648/j.ae.20230701.11

AMA Style

Balbine Matuam, Nicolas Gnepie, Jaures Fotsa, Abraham Tetang, Marcel Edoun, et al. Numerical Simulation of Heat and Moisture Transfer in Corrugated Walls Dryer. Appl Eng. 2023;7(1):1-10. doi: 10.11648/j.ae.20230701.11

Copyright © 2023 Authors retain the copyright of this article.
This article is an open access article distributed under the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0/) which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

1. Akpinar E. K. (2005). Evaluation of convective heat transfer coefficient of various crops in cyclone type. Energy Conversion and Management. Vol. 46. pp 2439–2454.
2. Anwar S. I., Singh, R. D. (2012). Convective heat transfer coefficient of Indian gooseberry (emblica officinalis) dried in three different forms under forced convection mode. Journal of Engineering Science and Technology. Vol. 7. No. 5. pp 635 – 645.
3. Azharul K., Hawlader M. N. A. (2005). Mathematical modelling and experimental investigation of tropical fruits drying. International Journal of Heat and Mass Transfer. Vol 48. pp 4914–4925.
4. Bennamoun L., Fraikin L., and Leonard A. (2014). Modeling and Simulation of Heat and Mass Transfer During Convective Drying of Waste water Sludge with Introduction of Shrinkage Phenomena. Drying Technology. Vol. 32. pp 13–22.
5. Chandra Mohan V. P., Talukdar P. (2010). Three-dimensional numerical modeling of simultaneous heat and moisture transfer in a moist object subjected to convective drying. International Journal of Heat and Mass Transfer. Vol. 53. pp 4638–4650.
6. Dragiša Tolmač, Slavica Prvulović, Ljiljana Radovanović. (2008). Effects of Heat Transfer on Convection Dryer with Pneumatic Transport of Material. FME Transactions. Vol. 36. No 1. pp 45-49.
7. Eiamsa-ard, S., Promvonge, P. (2007). Enhancement of Heat Transfer in a Circular Wavy-surfaced Tube with a Helical-tape Insert. International Energy Journal. Vol 8. pp 29-36.
8. Hemis M., Singh B. C., Jayas S. D. and Bettahar A. (2011). Simulation of Coupled Heat and Mass Transfer in Granular Porous Media: Application to the Drying of Wheat. Drying Technology. Vol. 29. pp 1267–127.
9. Hussein M., Dincer I. (2003). Two-dimensional heat and moisture transfer analysis of a cylindrical moist object subjected to drying: A finite-difference approach. International Journal of Heat and Mass Transfer. Vol 46. pp 4033–4039.
10. Jawarneh Ali M. (2007). Heat Transfer Enhancement in Swirl Annulus Flows. 5th Wseas Int. Conf. On Environment, Ecosystems and Development, Tenerife, Spain. December pp 14-16.
11. Kaya A., Aydın O., Dincer I. (2006). Numerical modeling of heat and mass transfer during forced convection drying of rectangular moist objects. International Journal of Heat and Mass Transfer. Vol. 49. pp 3094–3103.
12. Kaya A. and Aydin O., Dincer I. (2007). Numerical Modeling of Forced-Convection drying Of Cylindrical Moist Objects. Numerical Heat Transfer, Part A. Vol. 51. pp 843–854.
13. Kaya A., Aydın O., Dincer I. (2008). Experimental and numerical investigation of heat and mass transfer during drying of Hayward kiwi fruits (Actinidia Deliciosa Planch). Journal of Food Engineering. Vol. 88. pp 323–330.
14. Khaldi. (2018). Etude numérique du comportement thermique d’un séchoir solaire utilisant un lit thermique pour le stockage d’énergie. Thèse soutenue en vue de l’obtention du Doctorat de l’Université Bourgogne Franche-Comte.
15. Korukcu, M. O. (2017). Numerical Modeling of Heat and Mass Transfer Characteristics During the Forced Convection Drying of a Square Cylinder Under Strong Blockage. Numerical Heat Transfer, Part A: Applications. Vol. 72. No 2. pp 171–184.
16. Mabrouk B. S., Benalia E., Oueslatia H. (2012). Experimental Study and Numerical Modelling of Drying Characteristics of Apple Slices. Food And Bio Products Processing. Vol. 90. pp 719–728.
17. Mahesh Kumar, Pankaj Khatak, Ravinder Kumar Sahdev. (2011). The effect of open sun and indoor forced convection on heat transfer coefficients for the drying of papad. Journal of Energy in Southern Africa. Vol. 22. No 2.
18. Matuam B., Edoun M., Kuitche A., Zeghmati B. (2015). Experimental Evaluation of the Thermal Performance of Dryer Airflow Configuration. International Journal of Energy Engineering. vol 5. N°4. pp 80-86.
19. Nadeau J. P., Puiggali J. R. (1995). Séchage: des processus physiques aux procédés industriels. Technique et Documentation – Paris: Lavoisier. pp 112-126.
20. Ray S. et Date A. W. (2001). Laminar flow and heat transfer through square duct with twisted tape insert. International journal of heat and fluid flow. Vol. 22. pp 460-472.
21. Shahari, N. A. (2012). Mathematical Modeling of Drying Food Products: Application To Tropical Fruits. Thèse soutenue en vue de l’obtention du Doctorat PHD à l’Université de Nottingham.
22. Talukdar P., IskraC. R., Simonson C. J. (2007). Combined heat and mass transfer for laminar flow of moist air in a 3D rectangular duct: CFD simulation and validation with experimental data. International Journal of Heat and Mass Transfer. Vol. 51. pp 3091–3102.
23. Tekasakul P., Dejchanchaiwong R., Tirawanichakul Y., and Tirawanichaku S. (2015). Three-Dimensional Numerical Modeling of Heat and Moisture Transfer in Natural Rubber Sheet Drying Process. Drying Technology. Vol. 33. pp 1124–1137.
24. Utriainen E., Sunden B. (2002). A numerical investigation of primary surface rounded cross wavy ducts. Heat and Mass Transfer. Vol 38. pp 537-542.
25. Vijayaraj, B., & Saravanan, R. (2008). Numerical Modeling of Moisture and Temperature Distribution within a Rectangular Bagasse Layer Undergoing Drying. Drying Technology. Vol. 2. No 6. pp 749–758.
26. Wang N. et Brennan J. G. (1995). A mathematical model of simultaneous heat and moisture transfer during drying of potato. Journal of food engineering. Vol. 24. pp 47-60.
27. Yahaya S. (2007). Modélisation des transferts de chaleur et de masse dans les aliments: Cas du séchage de la mangue. Mémoire soutenue en vue de l’obtention du diplôme de master à l’Institut International d’Ingénierie de l’Eau et de l’Environnement (2IE).