A Case Study of a Small Switching Power Supply Process: Based on the Module of Production

Cao Yanyan

doi:doi:10.11648/j.ajmse.20220701.11

| Peer-Reviewed

A Case Study of a Small Switching Power Supply Process: Based on the Module of Production

Cao Yanyan

Published in American Journal of Management Science and Engineering (Volume 7, Issue 1)

Received: 15 March 2022 Accepted: 11 April 2022 Published: 20 April 2022

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

With the rapid development of electronic products, technology plays an important role in the management and production of electronic products. In the increasingly fierce market competition, excellent technological process is also one of the important bargaining chips for the success of an enterprise, and it is the embodiment of the level of enterprise management ability. As a product of modern power electronic technology, switching power supply represents the development direction of regulated power supply, and it is an industry pursued by many electronic companies. Switching power supply manufacturers should not only pay attention to the miniaturized power module technology, but also do a good job in the quality management of the production process. Only by doing a good job in the production process design, can better ensure the function and quality of the miniaturized switching power supply module, and help enterprises gain an advantage in the market competition. Using the method of case study, this article interviewed the small switching power supply design engineers and production workshop workers in Factory A. combined with literature analysis and on-site observation, it is proposed that the production process of switching power supply module should involve three stages: before production, during production, and after production, which include 8 links: production preparation, coil production, the device welding assembly, cleaning, inspection, potting, sealing and marking. In particular, the requirements and precautions of each step are described in detail.

Published in	American Journal of Management Science and Engineering (Volume 7, Issue 1)
DOI	10.11648/j.ajmse.20220701.11
Page(s)	1-5
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2022. Published by Science Publishing Group

Keywords

Switching Power Supply, Manufacturing, Technological Process

References

[1]	Tu Hongqi (2014). On the processing technology of electronic products [J]. Electronic World (10), 354.
[2]	Cao Yanyan, Liu Jingchao & Li Xiaohui (2014). Design flow of power module based on Protel 99 SE [J]. Wireless Internet Technology (12), 125.
[3]	Cao Yanyan, Liu Jingchao & Li Xiaohui (2015). Production process flow of small switching power supply [J]. Science and Technology Outlook (10), 150.
[4]	Hu Linmin (2019). The realization process of electronic product production process and management [J]. Information Recording Materials (04), 219-220 doi: 10.16009/j.cnki.cn13-1295/tq.2019.04.139.
[5]	Zhao Hongmei & Zhao Chaochao (2020). Explore the production technology and process of electronic products [J]. Wireless Internet technology (08), 124-125.
[6]	Mo Liubai (2019). Discuss the quality influencing factors and management strategies in the production of electronic products [J]. Technology Information (10).
[7]	Wang Jin (2020). Discuss the quality influencing factors and management strategies in the production of electronic products [J]. Digital communication world (07), 226-227.
[8]	Peng Chuan (2020). Analyze the quality influencing factors and Countermeasures in the production process of electronic products [J]. Internal Combustion Engines and Accessories (08), 216-217.
[9]	Xi Aihong & Zhao Guangxu (2022). Discussion on power supply design and fault of electronic equipment [J]. China Science and Technology Information (06), 59-60.
[10]	Li Sen (2018). Analysis of electronic product processing technology [J]. Modern information technology (04), 49-50.
[11]	Tian Xiao (2022). Influencing factors and Countermeasures of quality in the production process of electronic products [J]. Volkswagen Standardization (04), 13-15.
[12]	Yin Junwei (2021). Application analysis of switching power supply maintenance technology for medical equipment [J]. China Hi Tech (23), 95-96.
[13]	Ji Hua (2020). The working principle and common fault analysis and maintenance of switching power supply in medical equipment [J]. China Equipment Engineering (22), 56-57.
[14]	Yao Shengxiang (2021). Case analysis and Discussion on fire fault of switching power supply [J]. Fire today (11), 112-114.
[15]	Mu Jiaxiao, Luo Senwen, he Guolong, LAN Yufeng & Zhou Xingli (2020). Analysis and Discussion on several fire failure cases of switching power supply [J]. Guangdong Communication Technology (08), 75-79.

Cite This Article

Plain Text BibTeX RIS

APA Style

Cao Yanyan. (2022). A Case Study of a Small Switching Power Supply Process: Based on the Module of Production. American Journal of Management Science and Engineering, 7(1), 1-5. https://doi.org/10.11648/j.ajmse.20220701.11

Copy | Download

ACS Style

Cao Yanyan. A Case Study of a Small Switching Power Supply Process: Based on the Module of Production. Am. J. Manag. Sci. Eng. 2022, 7(1), 1-5. doi: 10.11648/j.ajmse.20220701.11

Copy | Download

AMA Style

Cao Yanyan. A Case Study of a Small Switching Power Supply Process: Based on the Module of Production. Am J Manag Sci Eng. 2022;7(1):1-5. doi: 10.11648/j.ajmse.20220701.11

Copy | Download

@article{10.11648/j.ajmse.20220701.11,
  author = {Cao Yanyan},
  title = {A Case Study of a Small Switching Power Supply Process: Based on the Module of Production},
  journal = {American Journal of Management Science and Engineering},
  volume = {7},
  number = {1},
  pages = {1-5},
  doi = {10.11648/j.ajmse.20220701.11},
  url = {https://doi.org/10.11648/j.ajmse.20220701.11},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajmse.20220701.11},
  abstract = {With the rapid development of electronic products, technology plays an important role in the management and production of electronic products. In the increasingly fierce market competition, excellent technological process is also one of the important bargaining chips for the success of an enterprise, and it is the embodiment of the level of enterprise management ability. As a product of modern power electronic technology, switching power supply represents the development direction of regulated power supply, and it is an industry pursued by many electronic companies. Switching power supply manufacturers should not only pay attention to the miniaturized power module technology, but also do a good job in the quality management of the production process. Only by doing a good job in the production process design, can better ensure the function and quality of the miniaturized switching power supply module, and help enterprises gain an advantage in the market competition. Using the method of case study, this article interviewed the small switching power supply design engineers and production workshop workers in Factory A. combined with literature analysis and on-site observation, it is proposed that the production process of switching power supply module should involve three stages: before production, during production, and after production, which include 8 links: production preparation, coil production, the device welding assembly, cleaning, inspection, potting, sealing and marking. In particular, the requirements and precautions of each step are described in detail.},
 year = {2022}
}

Copy | Download

TY  - JOUR
T1  - A Case Study of a Small Switching Power Supply Process: Based on the Module of Production
AU  - Cao Yanyan
Y1  - 2022/04/20
PY  - 2022
N1  - https://doi.org/10.11648/j.ajmse.20220701.11
DO  - 10.11648/j.ajmse.20220701.11
T2  - American Journal of Management Science and Engineering
JF  - American Journal of Management Science and Engineering
JO  - American Journal of Management Science and Engineering
SP  - 1
EP  - 5
PB  - Science Publishing Group
SN  - 2575-1379
UR  - https://doi.org/10.11648/j.ajmse.20220701.11
AB  - With the rapid development of electronic products, technology plays an important role in the management and production of electronic products. In the increasingly fierce market competition, excellent technological process is also one of the important bargaining chips for the success of an enterprise, and it is the embodiment of the level of enterprise management ability. As a product of modern power electronic technology, switching power supply represents the development direction of regulated power supply, and it is an industry pursued by many electronic companies. Switching power supply manufacturers should not only pay attention to the miniaturized power module technology, but also do a good job in the quality management of the production process. Only by doing a good job in the production process design, can better ensure the function and quality of the miniaturized switching power supply module, and help enterprises gain an advantage in the market competition. Using the method of case study, this article interviewed the small switching power supply design engineers and production workshop workers in Factory A. combined with literature analysis and on-site observation, it is proposed that the production process of switching power supply module should involve three stages: before production, during production, and after production, which include 8 links: production preparation, coil production, the device welding assembly, cleaning, inspection, potting, sealing and marking. In particular, the requirements and precautions of each step are described in detail.
VL  - 7
IS  - 1
ER  -

Copy | Download

Author Information

Cao Yanyan

Network Security and Data Department, Xi'jing University, Xi’an, China

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Cao Yanyan. (2022). A Case Study of a Small Switching Power Supply Process: Based on the Module of Production. American Journal of Management Science and Engineering, 7(1), 1-5. https://doi.org/10.11648/j.ajmse.20220701.11

Copy | Download

ACS Style

Cao Yanyan. A Case Study of a Small Switching Power Supply Process: Based on the Module of Production. Am. J. Manag. Sci. Eng. 2022, 7(1), 1-5. doi: 10.11648/j.ajmse.20220701.11

Copy | Download

AMA Style

Cao Yanyan. A Case Study of a Small Switching Power Supply Process: Based on the Module of Production. Am J Manag Sci Eng. 2022;7(1):1-5. doi: 10.11648/j.ajmse.20220701.11

Copy | Download

@article{10.11648/j.ajmse.20220701.11,
  author = {Cao Yanyan},
  title = {A Case Study of a Small Switching Power Supply Process: Based on the Module of Production},
  journal = {American Journal of Management Science and Engineering},
  volume = {7},
  number = {1},
  pages = {1-5},
  doi = {10.11648/j.ajmse.20220701.11},
  url = {https://doi.org/10.11648/j.ajmse.20220701.11},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajmse.20220701.11},
  abstract = {With the rapid development of electronic products, technology plays an important role in the management and production of electronic products. In the increasingly fierce market competition, excellent technological process is also one of the important bargaining chips for the success of an enterprise, and it is the embodiment of the level of enterprise management ability. As a product of modern power electronic technology, switching power supply represents the development direction of regulated power supply, and it is an industry pursued by many electronic companies. Switching power supply manufacturers should not only pay attention to the miniaturized power module technology, but also do a good job in the quality management of the production process. Only by doing a good job in the production process design, can better ensure the function and quality of the miniaturized switching power supply module, and help enterprises gain an advantage in the market competition. Using the method of case study, this article interviewed the small switching power supply design engineers and production workshop workers in Factory A. combined with literature analysis and on-site observation, it is proposed that the production process of switching power supply module should involve three stages: before production, during production, and after production, which include 8 links: production preparation, coil production, the device welding assembly, cleaning, inspection, potting, sealing and marking. In particular, the requirements and precautions of each step are described in detail.},
 year = {2022}
}

Copy | Download

TY  - JOUR
T1  - A Case Study of a Small Switching Power Supply Process: Based on the Module of Production
AU  - Cao Yanyan
Y1  - 2022/04/20
PY  - 2022
N1  - https://doi.org/10.11648/j.ajmse.20220701.11
DO  - 10.11648/j.ajmse.20220701.11
T2  - American Journal of Management Science and Engineering
JF  - American Journal of Management Science and Engineering
JO  - American Journal of Management Science and Engineering
SP  - 1
EP  - 5
PB  - Science Publishing Group
SN  - 2575-1379
UR  - https://doi.org/10.11648/j.ajmse.20220701.11
AB  - With the rapid development of electronic products, technology plays an important role in the management and production of electronic products. In the increasingly fierce market competition, excellent technological process is also one of the important bargaining chips for the success of an enterprise, and it is the embodiment of the level of enterprise management ability. As a product of modern power electronic technology, switching power supply represents the development direction of regulated power supply, and it is an industry pursued by many electronic companies. Switching power supply manufacturers should not only pay attention to the miniaturized power module technology, but also do a good job in the quality management of the production process. Only by doing a good job in the production process design, can better ensure the function and quality of the miniaturized switching power supply module, and help enterprises gain an advantage in the market competition. Using the method of case study, this article interviewed the small switching power supply design engineers and production workshop workers in Factory A. combined with literature analysis and on-site observation, it is proposed that the production process of switching power supply module should involve three stages: before production, during production, and after production, which include 8 links: production preparation, coil production, the device welding assembly, cleaning, inspection, potting, sealing and marking. In particular, the requirements and precautions of each step are described in detail.
VL  - 7
IS  - 1
ER  -

Copy | Download