Using Different Techniques in Data Transferring by Optisystem Program

Malik A. Jabbar; Baraa M. Albaker; S. M. Zafar Iqbal

doi:doi:10.11648/j.ajop.20170506.11

| Peer-Reviewed

Using Different Techniques in Data Transferring by Optisystem Program

Malik A. Jabbar, Baraa M. Albaker, S. M. Zafar Iqbal

Published in American Journal of Optics and Photonics (Volume 5, Issue 6)

Received: 5 February 2017 Accepted: 27 February 2017 Published: 19 December 2017

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

Nowadays, signal communication is considered as a vital element of our modern daily life. This is due to the need for transmitting large amount of different data types such as text, voice, images, videos, etc. The increase in the volume of data communications requires large data transmission capacity. The data can be transmitted using copper wire, but with low data transmission capacity. To resolve this issue of transmitting large data with a higher signal to noise ratio and larger communication distant, lightwave technology was adopted. The work focuses on the design and the modeling of single and dual channels optical communication systems that use lightwaves as a carrier for signal transmission. This is to study characteristics and conduct performance evaluation and analysis of the designed communication subsystems through the use of different data transmission and reception techniques. Optisystem simulation software is used as a powerful simulation tool in the development of optical system modules, which include the transmitter that converts signal to light, fiber-optic channel, and the receiver that converts light back to the original signal.

Published in	American Journal of Optics and Photonics (Volume 5, Issue 6)
DOI	10.11648/j.ajop.20170506.11
Page(s)	59-66
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2017. Published by Science Publishing Group

Keywords

Fiber Optics, Data Transfer, Optisystem, Lightwave, Optical Communication System

References

[1]	K. C. Kao and G. A. Hockam, ''Dielectric fiber surface wave guides for optical frequancy,'' proceeding of IEE, vol. 133, pp. 1151-1158, (1996).
[2]	Kapron F. P. et. al., ''Maximum Information capacity of Fiber Optic Waveguide,'' IEE Electron Lett., No. 13, pp. 69-76, (1977).
[3]	J. I. Yamada, S. Machida and T. Kimura, ''2 Gbit/s optical transmission experiments at 1.3 with 44 km single-mode fibre,'' Electron. Lett. 17, 479 (1981).
[4]	Takanori Okoshi, ''Recent Advances in Coherent Optical Fiber Communication Systems,'' Journal of lightwave Technology, Vol. LT-5, No. 1, (1987).
[5]	John Wiley & Sons, ''Fiber-Optic Communications Systems'', Third Edition, (2002).
[6]	Amemiya, M., ''Pulse Broadening due to Higher Order Dispersion and its Transmission Limit'', Journal of Lightwave Technology, Vol. 20, No. 4, pp. 591-597, (2002).
[7]	Demir, A., ''Noise analysis for optical fiber communication systems'', Journal of Lightwave Technology, pp. 441-445, (2003).
[8]	Chris Xu & Xiang Liu, ''Differential Phase-Shift Keying for High Spectral Efficiency Optical Transmissions'' IEEE Journal of Selected Topics In Quantum electronics, Vol. 10, No. 2, (2004).
[9]	Xiupu Zhang, and Zhenqian Qu, ''Noise Statistics in Optically Pre-Amplified DPSK Receivers with Optical Mach-Zehnder Interferometer Demodulation'', Optical Society of America, (2005).
[10]	Ghafour A. Mahdiraji & Edmond Z., ''Comparison oF Selected Digital Modulation Schemes (OOK, PPM and DPIM) for Wireless Optical Communications'', IEEE Xplore, pp. 5-10, (2006).
[11]	Shangai Bin Li., ''BER performance analysis of PIN photodiode in 10Gbps fiber optical communication'', Proceeding of IEEE, PP 1-3, (2006).
[12]	W. Astar, Jeffrey B. Driscoll et al, ''Conversion of 10 Gb/s NRZ-OOK to RZ-OOK utilizing XPM in a Si nanowire'', OPTICS EXPRESS, Vol. 17, No. 15, (2009).
[13]	Xiang Yang &Yang Hechao, ''The Application of OptiSystem in Optical Fiber Communication Experiments'', Proceedings of the Third International Symposium on Computer Science and Computational Technology, pp. 376-378, (2010).
[14]	Beena R B.& Dr. S, ''Performance Comparison of Analog and Digital Radio Over Fiber Link'', International Journal of Computer Science & Engineering Technology (IJCSET), Vol. 3, No. 6, pp. 193-197, (2012).
[15]	S. K Mohapatra, R. Bhojray et al, ''Analog and digital modulation formats of optical fiber communication within and beyond 100 GB/S: a comparative overview'', International Journal of Electronics and Communication Engineering & Technology (IJECET), Vol. 4, No. 2, pp. 198-216, (2013).
[16]	Miss. Preeti V. Murkute, Mr. A. H. Karode, ''Implementation of Coherent Optical Digital Communication Systems Using Digital Signal Processor & FPGA'', IJEBEA, pp. 89-94, (2014).
[17]	N. Alic, E. Myslivets et al, ''Nonlinearity Cancellation in Fiber Optic Links Based on Frequency Referenced Carriers'', Journal of Lightwave Technology, Vol. 32, No. 15, pp. 2690-2677, (2014).
[18]	Alex Alvarado, Erik Agrell et al, ''Replacing the Soft-Decision FEC Limit Paradigm in the Design of Optical Communication Systems'', Journal of Lightwave Technology, Vol. 33, No. 20, (2015).

Cite This Article

Plain Text BibTeX RIS

APA Style

Malik A. Jabbar, Baraa M. Albaker, S. M. Zafar Iqbal. (2017). Using Different Techniques in Data Transferring by Optisystem Program. American Journal of Optics and Photonics, 5(6), 59-66. https://doi.org/10.11648/j.ajop.20170506.11

Copy | Download

ACS Style

Malik A. Jabbar; Baraa M. Albaker; S. M. Zafar Iqbal. Using Different Techniques in Data Transferring by Optisystem Program. Am. J. Opt. Photonics 2017, 5(6), 59-66. doi: 10.11648/j.ajop.20170506.11

Copy | Download

AMA Style

Malik A. Jabbar, Baraa M. Albaker, S. M. Zafar Iqbal. Using Different Techniques in Data Transferring by Optisystem Program. Am J Opt Photonics. 2017;5(6):59-66. doi: 10.11648/j.ajop.20170506.11

Copy | Download

@article{10.11648/j.ajop.20170506.11,
  author = {Malik A. Jabbar and Baraa M. Albaker and S. M. Zafar Iqbal},
  title = {Using Different Techniques in Data Transferring by Optisystem Program},
  journal = {American Journal of Optics and Photonics},
  volume = {5},
  number = {6},
  pages = {59-66},
  doi = {10.11648/j.ajop.20170506.11},
  url = {https://doi.org/10.11648/j.ajop.20170506.11},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajop.20170506.11},
  abstract = {Nowadays, signal communication is considered as a vital element of our modern daily life. This is due to the need for transmitting large amount of different data types such as text, voice, images, videos, etc. The increase in the volume of data communications requires large data transmission capacity. The data can be transmitted using copper wire, but with low data transmission capacity. To resolve this issue of transmitting large data with a higher signal to noise ratio and larger communication distant, lightwave technology was adopted. The work focuses on the design and the modeling of single and dual channels optical communication systems that use lightwaves as a carrier for signal transmission. This is to study characteristics and conduct performance evaluation and analysis of the designed communication subsystems through the use of different data transmission and reception techniques. Optisystem simulation software is used as a powerful simulation tool in the development of optical system modules, which include the transmitter that converts signal to light, fiber-optic channel, and the receiver that converts light back to the original signal.},
 year = {2017}
}

Copy | Download

TY - JOUR
T1 - Using Different Techniques in Data Transferring by Optisystem Program
AU - Malik A. Jabbar
AU - Baraa M. Albaker
AU - S. M. Zafar Iqbal
Y1 - 2017/12/19
PY - 2017
N1 - https://doi.org/10.11648/j.ajop.20170506.11
DO - 10.11648/j.ajop.20170506.11
T2 - American Journal of Optics and Photonics
JF - American Journal of Optics and Photonics
JO - American Journal of Optics and Photonics
SP - 59
EP - 66
PB - Science Publishing Group
SN - 2330-8494
UR - https://doi.org/10.11648/j.ajop.20170506.11
AB - Nowadays, signal communication is considered as a vital element of our modern daily life. This is due to the need for transmitting large amount of different data types such as text, voice, images, videos, etc. The increase in the volume of data communications requires large data transmission capacity. The data can be transmitted using copper wire, but with low data transmission capacity. To resolve this issue of transmitting large data with a higher signal to noise ratio and larger communication distant, lightwave technology was adopted. The work focuses on the design and the modeling of single and dual channels optical communication systems that use lightwaves as a carrier for signal transmission. This is to study characteristics and conduct performance evaluation and analysis of the designed communication subsystems through the use of different data transmission and reception techniques. Optisystem simulation software is used as a powerful simulation tool in the development of optical system modules, which include the transmitter that converts signal to light, fiber-optic channel, and the receiver that converts light back to the original signal.
VL - 5
IS - 6
ER -

Copy | Download

Author Information

Malik A. Jabbar

Department of Network Engineering, Al-iraqia University, Baghdad, Iraq
Baraa M. Albaker

Department of Network Engineering, Al-iraqia University, Baghdad, Iraq
S. M. Zafar Iqbal

Khwaja Fareed University of Engineering and Information Technology, Rahim Yar Khan, Pakistan

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Malik A. Jabbar, Baraa M. Albaker, S. M. Zafar Iqbal. (2017). Using Different Techniques in Data Transferring by Optisystem Program. American Journal of Optics and Photonics, 5(6), 59-66. https://doi.org/10.11648/j.ajop.20170506.11

Copy | Download

ACS Style

Malik A. Jabbar; Baraa M. Albaker; S. M. Zafar Iqbal. Using Different Techniques in Data Transferring by Optisystem Program. Am. J. Opt. Photonics 2017, 5(6), 59-66. doi: 10.11648/j.ajop.20170506.11

Copy | Download

AMA Style

Malik A. Jabbar, Baraa M. Albaker, S. M. Zafar Iqbal. Using Different Techniques in Data Transferring by Optisystem Program. Am J Opt Photonics. 2017;5(6):59-66. doi: 10.11648/j.ajop.20170506.11

Copy | Download

@article{10.11648/j.ajop.20170506.11,
  author = {Malik A. Jabbar and Baraa M. Albaker and S. M. Zafar Iqbal},
  title = {Using Different Techniques in Data Transferring by Optisystem Program},
  journal = {American Journal of Optics and Photonics},
  volume = {5},
  number = {6},
  pages = {59-66},
  doi = {10.11648/j.ajop.20170506.11},
  url = {https://doi.org/10.11648/j.ajop.20170506.11},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajop.20170506.11},
  abstract = {Nowadays, signal communication is considered as a vital element of our modern daily life. This is due to the need for transmitting large amount of different data types such as text, voice, images, videos, etc. The increase in the volume of data communications requires large data transmission capacity. The data can be transmitted using copper wire, but with low data transmission capacity. To resolve this issue of transmitting large data with a higher signal to noise ratio and larger communication distant, lightwave technology was adopted. The work focuses on the design and the modeling of single and dual channels optical communication systems that use lightwaves as a carrier for signal transmission. This is to study characteristics and conduct performance evaluation and analysis of the designed communication subsystems through the use of different data transmission and reception techniques. Optisystem simulation software is used as a powerful simulation tool in the development of optical system modules, which include the transmitter that converts signal to light, fiber-optic channel, and the receiver that converts light back to the original signal.},
 year = {2017}
}

Copy | Download