Designing material transportation equipment using human-powered carts is not efficient. An electric drive system can be an environmentally friendly system that can be implemented on three-wheeled carts, thereby replacing the role of humans in doing so. developing an electric drive device with a 48 V 1000watt Brushless DC (BLDC) type, 12 Ah lithium ion battery, so that it can reduce pollution problems and also meet the needs of the domestic automotive sector. This research aims to design and build a rotary steering drive system for a three-wheeled electric cart to make it lighter and easier. The steering seat frame functions to support the driver and a structural analysis was carried out using ergonomic analysis using the RULA method. Meanwhile, to determine the strength of the frame material and components of the cart steering system using SolidWorks software simulation. Based on the results of research on the design of the cart frame and steering system frame made of alloy steel with SolidWorks analysis for frame loading, it shows that the maximum stress value that occurs is still below the yield strength value of the material, the results of the frame loading safety factor value have exceeded the required value, so that very safe to withstand a load of 1962.33 N. Meanwhile, when loading the steering frame and steering mount, the maximum stress value that occurs is still below the material yield strength value, the resulting loading safety factor value has exceeded the required value, so it is very safe to withstand a load of 784.58 N. The results of the RULA method analysis on the ergonomic design of the rotary steering system show that the MSDs risk score for the new driver's posture after ergonomic intervention is 2 (two), which means the MSDs risk category is good, for the cart moving forward or backward. This means that the cart driver's posture is acceptable as long as it is not maintained. or recurring for a long time. Analysis of the power consumption of three-wheeled electric cart testing, namely the maximum value without load produces 571.14 Watts, while testing with load produces 583.68 Watts. This affects the use without load and with load on the performance/speed produced by the 48V1000 Watt BLDC motor. The prototype design of this three-wheeled electric cart has the advantage that it can be used on narrow roads and alleys in hotel or company yards.
| Published in | American Journal of Science, Engineering and Technology (Volume 8, Issue 4) |
| DOI | 10.11648/j.ajset.20230804.17 |
| Page(s) | 217-225 |
| Creative Commons |
This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited. |
| Copyright |
Copyright © The Author(s), 2023. Published by Science Publishing Group |
Steering System, Electric Cart, Solid Works, RULA, Ergonomics
| [1] | J. Jatmiko, A. Basith, A. Ulinuha, I. S. Khak, and D. S. D. Putra, “Design and Implementation of Urban Concept Electric Vehicle Design with 1000 Watt BLDC Drive,” Emit. J. Tek. Elektro, vol. 19, no. 2, pp. 93–97, 2019, doi: 10.23917/emitor.v19i2.8686. |
| [2] | R. M. Moerdyanto et al., “Steering System Design on Simple Three-Wheeled Scooter Prototype,” J. Teknol. pp. 1–6, 2018. |
| [3] | Christy, D. V. (2019). Ergonomics and Employee Engagement. International Journal of Mechanical Engineering and Technology (IJMET), 10 (2), 5. |
| [4] | Berlin, C., Adams, C., & Chalmers University of Technology, SE. (2017). Production Ergonomics: Designing Work Systems to Support Optimal Human Performance. Ubiquity Press. https://doi.org/10.5334/bbe |
| [5] | Theopilus, Y., Jonathan, W., & Gustin, Y. (2018). Development of Material Handling Tools to Minimize the Workload of Crank Case Production Operators at PT.”X”. Jurnal Rekayasa. |
| [6] | Sudiajeng, L., Adiputra, N., & Leibbrandt, R. (2012). Ergonomics work stations decreases the health impairment and saves electrical energy at the woodworking workshop in Bali, Indonesia. Journal of Human Ergology, 41 (1_2), 41-54. |
| [7] | Sudiajeng, L., Tarwaka, T., Sutapa, K., Sudana, M., & Yusuf, M. (2022). Ergonomic tetrapod reduces the MSDs risk and productivity of steel-bar assembly for reinforcement concrete beams. International Research Journal of Engineering, IT & Scientific Research, 9 (1), 1–13. https://doi.org/10.21744/irjeis.v9n1.2255 |
| [8] | A. Manuaba, “Accelerating OHS-Ergonomics Program By Integrating ’Built-In” Within The Industry’s Economic Development Scheme Is A Must-With Special Attention To Small And Medium Enteprises (SMEs),” in Proceedings the 21st Annual Conference of The Asia Pasific Occupational Safety & Health Organization, 2005. |
| [9] | K. H. E. Kroemer and E. Grandjean, Fitting The Task To The Human, Fifth Editione A Textbook Of Occupational Ergonomics. London: CRC Press, 2009. |
| [10] | M. Yusuf and N. D. Irwanti, “Application of Occupational Health and Safety (K3) in Agrotourism,” in Proceedings of the Second Asia Pacific International Conference on Industrial Engineering and Operations Management, 2021, pp. 3734–3741. |
| [11] | A. A. N. B. Mulawarman, I. K. G. J. Suarbawa, and M. Yusuf, “Slice Tool Model Design Dynamo Drive Tempeh to Increase Work Productivity of Tempeh Chip Craperers,” Am. J. Appl. Sci. Res., vol. 8, no. 4, pp. 88–92, 2022. |
| [12] | Z. F. Hunusalela, S. Perdana, and G. K. Dewanti, “Analysis of Operator Working Posture Using the RULA and REBA Methods at the Jakarta Convection Shop,” IKRAITH-Teknologi, vol. 6, no. 1, pp. 1–10, 2021, doi: 10.37817/ikraith-teknologi.v6i1.1656. |
| [13] | S. Sundar, T. Sudarsanan. Radha Krishnan “Review of Design and Fabrication of four wheel Steering system” International Journal of Recent Trends in Engineering & Research (IJRTER) Volume 04, Issue 10; October- 2018 [ISSN: 2455-1457] DOI: 10.23883/IJRTER.2018.4386.3THDB. |
| [14] | Akin, J. E. 2010. Finite element analysis concepts: via SolidWorks, 2010 ed. World Scientific. |
| [15] | J. Tesalonika, B. A. H. Siboro, and C. E. Marbun, “Design of product design and innovation laboratory instructor workstations using the ergonomic function deployment method,” Oper. Excell. J. Appl. Ind. Eng., vol. 13, no. 2, p. 148, 2021, doi: 10.22441/oe.2021.v13.i1.009. |
| [16] | Chowdury M. L. Rahman. Study and analysis of work postures of workers working in a ceramic industry through rapid upper limb assessment (rula). International Journal of Engineering and Applied Sciences, Aug. 2014. Vol. 5. No. 03. www.eaas-journal.org |
| [17] | D. Harjono and W. Widodo, “Analysis of the BLDC Motor Drive System in the Ponecar Electric Car,” J. Elit, vol. 2, no. 1, pp. 11–22, 2021, doi: 10.31573/elit.v2i1.212. |
| [18] | Wibawa, Lasinta Ari Nendra; Design and Strength Analysis of the Tool Cabinet Frame at Balai Lapan Garut Using the Finite Element Method, Machine; Jurnal Teknik Mesin Vol. 5 No. 2, Oktober 2019 P-ISSN: 2502-2040 E-ISSN: 2581-0138. |
| [19] | Munir, Qomaruddin, Winarso, Design and simulation of brick press machine punch. Jurnal CRANKSHAFT, Vol. 2 No. 1. Maret 2019 ISSN: 2623-0720 (Print), 2623-0755 (Online). |
| [20] | Prasetyo, E., Hermawan, R., Ridho, M. N. I., Hajar, I. I., Hariri, H & Pane, E. A (2020). Frame Strength Analysis on Transverse Ducting Flange (TDF) Machines Using Solid Works Software. Rekayasa, 13 (3), 299-306. doi: https://doi.org/10.21107/rekayasa.v13i3.8872 |
APA Style
Made Sudana, I., Made Rajendra, I., Yusuf, M., Gede Nyoman Suta Waisnawa, I. (2023). Design of an Ergonomic Rotating Steering System on an Electric Cart Based on RULA Analysis (Rapid Upper Limb Assessment) and Using Solidworks Software. American Journal of Science, Engineering and Technology, 8(4), 217-225. https://doi.org/10.11648/j.ajset.20230804.17
ACS Style
Made Sudana, I.; Made Rajendra, I.; Yusuf, M.; Gede Nyoman Suta Waisnawa, I. Design of an Ergonomic Rotating Steering System on an Electric Cart Based on RULA Analysis (Rapid Upper Limb Assessment) and Using Solidworks Software. Am. J. Sci. Eng. Technol. 2023, 8(4), 217-225. doi: 10.11648/j.ajset.20230804.17
AMA Style
Made Sudana I, Made Rajendra I, Yusuf M, Gede Nyoman Suta Waisnawa I. Design of an Ergonomic Rotating Steering System on an Electric Cart Based on RULA Analysis (Rapid Upper Limb Assessment) and Using Solidworks Software. Am J Sci Eng Technol. 2023;8(4):217-225. doi: 10.11648/j.ajset.20230804.17
Share This Article
Twitter
Linked In
Facebook
Copy
Download@article{10.11648/j.ajset.20230804.17,
author = {I. Made Sudana and I. Made Rajendra and M. Yusuf and I. Gede Nyoman Suta Waisnawa},
title = {Design of an Ergonomic Rotating Steering System on an Electric Cart Based on RULA Analysis (Rapid Upper Limb Assessment) and Using Solidworks Software},
journal = {American Journal of Science, Engineering and Technology},
volume = {8},
number = {4},
pages = {217-225},
doi = {10.11648/j.ajset.20230804.17},
url = {https://doi.org/10.11648/j.ajset.20230804.17},
eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajset.20230804.17},
abstract = {Designing material transportation equipment using human-powered carts is not efficient. An electric drive system can be an environmentally friendly system that can be implemented on three-wheeled carts, thereby replacing the role of humans in doing so. developing an electric drive device with a 48 V 1000watt Brushless DC (BLDC) type, 12 Ah lithium ion battery, so that it can reduce pollution problems and also meet the needs of the domestic automotive sector. This research aims to design and build a rotary steering drive system for a three-wheeled electric cart to make it lighter and easier. The steering seat frame functions to support the driver and a structural analysis was carried out using ergonomic analysis using the RULA method. Meanwhile, to determine the strength of the frame material and components of the cart steering system using SolidWorks software simulation. Based on the results of research on the design of the cart frame and steering system frame made of alloy steel with SolidWorks analysis for frame loading, it shows that the maximum stress value that occurs is still below the yield strength value of the material, the results of the frame loading safety factor value have exceeded the required value, so that very safe to withstand a load of 1962.33 N. Meanwhile, when loading the steering frame and steering mount, the maximum stress value that occurs is still below the material yield strength value, the resulting loading safety factor value has exceeded the required value, so it is very safe to withstand a load of 784.58 N. The results of the RULA method analysis on the ergonomic design of the rotary steering system show that the MSDs risk score for the new driver's posture after ergonomic intervention is 2 (two), which means the MSDs risk category is good, for the cart moving forward or backward. This means that the cart driver's posture is acceptable as long as it is not maintained. or recurring for a long time. Analysis of the power consumption of three-wheeled electric cart testing, namely the maximum value without load produces 571.14 Watts, while testing with load produces 583.68 Watts. This affects the use without load and with load on the performance/speed produced by the 48V1000 Watt BLDC motor. The prototype design of this three-wheeled electric cart has the advantage that it can be used on narrow roads and alleys in hotel or company yards.
},
year = {2023}
}
TY - JOUR T1 - Design of an Ergonomic Rotating Steering System on an Electric Cart Based on RULA Analysis (Rapid Upper Limb Assessment) and Using Solidworks Software AU - I. Made Sudana AU - I. Made Rajendra AU - M. Yusuf AU - I. Gede Nyoman Suta Waisnawa Y1 - 2023/11/11 PY - 2023 N1 - https://doi.org/10.11648/j.ajset.20230804.17 DO - 10.11648/j.ajset.20230804.17 T2 - American Journal of Science, Engineering and Technology JF - American Journal of Science, Engineering and Technology JO - American Journal of Science, Engineering and Technology SP - 217 EP - 225 PB - Science Publishing Group SN - 2578-8353 UR - https://doi.org/10.11648/j.ajset.20230804.17 AB - Designing material transportation equipment using human-powered carts is not efficient. An electric drive system can be an environmentally friendly system that can be implemented on three-wheeled carts, thereby replacing the role of humans in doing so. developing an electric drive device with a 48 V 1000watt Brushless DC (BLDC) type, 12 Ah lithium ion battery, so that it can reduce pollution problems and also meet the needs of the domestic automotive sector. This research aims to design and build a rotary steering drive system for a three-wheeled electric cart to make it lighter and easier. The steering seat frame functions to support the driver and a structural analysis was carried out using ergonomic analysis using the RULA method. Meanwhile, to determine the strength of the frame material and components of the cart steering system using SolidWorks software simulation. Based on the results of research on the design of the cart frame and steering system frame made of alloy steel with SolidWorks analysis for frame loading, it shows that the maximum stress value that occurs is still below the yield strength value of the material, the results of the frame loading safety factor value have exceeded the required value, so that very safe to withstand a load of 1962.33 N. Meanwhile, when loading the steering frame and steering mount, the maximum stress value that occurs is still below the material yield strength value, the resulting loading safety factor value has exceeded the required value, so it is very safe to withstand a load of 784.58 N. The results of the RULA method analysis on the ergonomic design of the rotary steering system show that the MSDs risk score for the new driver's posture after ergonomic intervention is 2 (two), which means the MSDs risk category is good, for the cart moving forward or backward. This means that the cart driver's posture is acceptable as long as it is not maintained. or recurring for a long time. Analysis of the power consumption of three-wheeled electric cart testing, namely the maximum value without load produces 571.14 Watts, while testing with load produces 583.68 Watts. This affects the use without load and with load on the performance/speed produced by the 48V1000 Watt BLDC motor. The prototype design of this three-wheeled electric cart has the advantage that it can be used on narrow roads and alleys in hotel or company yards. VL - 8 IS - 4 ER -
Department of Mechanical Engineering, Politeknik Negeri Bali, Bali, Indonesia
Department of Mechanical Engineering, Politeknik Negeri Bali, Bali, Indonesia
Department of Mechanical Engineering, Politeknik Negeri Bali, Bali, Indonesia
Department of Mechanical Engineering, Politeknik Negeri Bali, Bali, Indonesia
Information