Application of Radio Frequency Identification Positioning Technology in Valuables Monitoring

Guicheng Shen; Kunlun Wang; Chaofan Su; Juntao Li

doi:doi:10.11648/j.ijiis.20160504.12

| Peer-Reviewed

Application of Radio Frequency Identification Positioning Technology in Valuables Monitoring

Guicheng Shen, Kunlun Wang, Chaofan Su, Juntao Li

Published in International Journal of Intelligent Information Systems (Volume 5, Issue 4)

Received: 3 May 2016 Accepted: 13 May 2016 Published: 1 August 2016

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

With the development of positioning services, an increasing number of people and companies pay attention to the management and protection of the precious goods which they possess, through the determination of its location to achieve the management purpose [1]. At present, the main positioning way is to use the global positioning system (GPS), but many of the valuable items are stored in the indoor, and it's hard to receive a satellite signal in the room, so it cannot be accurate positioning. As a new short distance wireless data recognition technology at present, Radio Frequency Identification (RFID) indoor positioning technology is very suitable for the indoor positioning. Because it has many characteristics: large amount of data storage, readable and writable, strong penetrating power, long recognition distance, fast read-write speed and the use of the characteristics of long service life and good adaptability to the environment, etc. Among the RFID indoor positioning technology of many positioning algorithms, the three sides positioning algorithm is commonly used, and more mature. At the same time, the storage space of most valuable items is simple, and the environmental factors have little influence on the signal interference. So it is feasible to use the three sides positioning algorithm of RFID positioning algorithms to locate the valuables in the indoor.

Published in	International Journal of Intelligent Information Systems (Volume 5, Issue 4)
DOI	10.11648/j.ijiis.20160504.12
Page(s)	55-59
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2016. Published by Science Publishing Group

Keywords

RFID Technology, Valuables, Monitoring System, Positioning Algorithm

References

[1]	Danshi Sun, Li Yang. ZigBee Positioning Technology in Valuables Monitoring [J]. Geomatics & Spatial Information Technology, 2015, 07: 191-192.
[2]	Xiuli Ma, Xiulian Wang, Libo Wei. Design of monitoring and management system for valuables based on RFID [J]. Automatic identification technology of China, 2009, 01: 21-24.
[3]	Desheng Zhang. Application of RFID technology in the management of firearms [J]. National Defense Technology Foundation. 2008, 11: 41-44.
[4]	Arnitz D, Reynolds M S. Multitransmiter wireles power transfer optimization for backscater RFID transponders [J]. Antennas and Wireles Propagation Leters, IEEE, 2013, 12 (4): 849-852.
[5]	Li X, Zhang Y, Amin M G. Multifrequency-based range esti- mation of RFID tags [C]//Proc of 2009IEEE International Conference on RFID, IEEE, 2009: 147-154.
[6]	Yu Shu, Jiang Wu, Donghui Li, Huiying Kuang. Research on the application of active RFID location algorithm in firearms control system [J]. Mobile Communication. 2015, 10: 61-65.
[7]	K. Pahlavan, X. Li, and J. P. Makela. Indoor geolocation science and technology. IEEE Commun. Mag., vol. 40, no. 2, pp. 112-118, Feb. 2002.
[8]	Junmin Bai. Research and design of firearms dynamic monitoring system based on RFID Technology [D]. Xi'an Electronic Technology University. 2014
[9]	Wenjian Wu, Jin Liu, Helin Li, Bing Kong. An improved weighted three edge location algorithm [J]. Journal of Zhengzhou University of Light Industry (NATURAL SCIENCE EDITION). 2012, 03: 83-85.
[10]	Peigang Sun, Hai Zhao, Guangjie Han, Xiyuan Zhang, Jian Zhu. Chaotic triangular positioning reference point selection algorithm [J]. Computer Research and Development. 2007, 12: 1987-1995.

Cite This Article

Plain Text BibTeX RIS

APA Style

Guicheng Shen, Kunlun Wang, Chaofan Su, Juntao Li. (2016). Application of Radio Frequency Identification Positioning Technology in Valuables Monitoring. International Journal of Intelligent Information Systems, 5(4), 55-59. https://doi.org/10.11648/j.ijiis.20160504.12

Copy | Download

ACS Style

Guicheng Shen; Kunlun Wang; Chaofan Su; Juntao Li. Application of Radio Frequency Identification Positioning Technology in Valuables Monitoring. Int. J. Intell. Inf. Syst. 2016, 5(4), 55-59. doi: 10.11648/j.ijiis.20160504.12

Copy | Download

AMA Style

Guicheng Shen, Kunlun Wang, Chaofan Su, Juntao Li. Application of Radio Frequency Identification Positioning Technology in Valuables Monitoring. Int J Intell Inf Syst. 2016;5(4):55-59. doi: 10.11648/j.ijiis.20160504.12

Copy | Download

@article{10.11648/j.ijiis.20160504.12,
  author = {Guicheng Shen and Kunlun Wang and Chaofan Su and Juntao Li},
  title = {Application of Radio Frequency Identification Positioning Technology in Valuables Monitoring},
  journal = {International Journal of Intelligent Information Systems},
  volume = {5},
  number = {4},
  pages = {55-59},
  doi = {10.11648/j.ijiis.20160504.12},
  url = {https://doi.org/10.11648/j.ijiis.20160504.12},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijiis.20160504.12},
  abstract = {With the development of positioning services, an increasing number of people and companies pay attention to the management and protection of the precious goods which they possess, through the determination of its location to achieve the management purpose [1]. At present, the main positioning way is to use the global positioning system (GPS), but many of the valuable items are stored in the indoor, and it's hard to receive a satellite signal in the room, so it cannot be accurate positioning. As a new short distance wireless data recognition technology at present, Radio Frequency Identification (RFID) indoor positioning technology is very suitable for the indoor positioning. Because it has many characteristics: large amount of data storage, readable and writable, strong penetrating power, long recognition distance, fast read-write speed and the use of the characteristics of long service life and good adaptability to the environment, etc. Among the RFID indoor positioning technology of many positioning algorithms, the three sides positioning algorithm is commonly used, and more mature. At the same time, the storage space of most valuable items is simple, and the environmental factors have little influence on the signal interference. So it is feasible to use the three sides positioning algorithm of RFID positioning algorithms to locate the valuables in the indoor.},
 year = {2016}
}

Copy | Download

TY  - JOUR
T1  - Application of Radio Frequency Identification Positioning Technology in Valuables Monitoring
AU  - Guicheng Shen
AU  - Kunlun Wang
AU  - Chaofan Su
AU  - Juntao Li
Y1  - 2016/08/01
PY  - 2016
N1  - https://doi.org/10.11648/j.ijiis.20160504.12
DO  - 10.11648/j.ijiis.20160504.12
T2  - International Journal of Intelligent Information Systems
JF  - International Journal of Intelligent Information Systems
JO  - International Journal of Intelligent Information Systems
SP  - 55
EP  - 59
PB  - Science Publishing Group
SN  - 2328-7683
UR  - https://doi.org/10.11648/j.ijiis.20160504.12
AB  - With the development of positioning services, an increasing number of people and companies pay attention to the management and protection of the precious goods which they possess, through the determination of its location to achieve the management purpose [1]. At present, the main positioning way is to use the global positioning system (GPS), but many of the valuable items are stored in the indoor, and it's hard to receive a satellite signal in the room, so it cannot be accurate positioning. As a new short distance wireless data recognition technology at present, Radio Frequency Identification (RFID) indoor positioning technology is very suitable for the indoor positioning. Because it has many characteristics: large amount of data storage, readable and writable, strong penetrating power, long recognition distance, fast read-write speed and the use of the characteristics of long service life and good adaptability to the environment, etc. Among the RFID indoor positioning technology of many positioning algorithms, the three sides positioning algorithm is commonly used, and more mature. At the same time, the storage space of most valuable items is simple, and the environmental factors have little influence on the signal interference. So it is feasible to use the three sides positioning algorithm of RFID positioning algorithms to locate the valuables in the indoor.
VL  - 5
IS  - 4
ER  -

Copy | Download

Author Information

Guicheng Shen

School of information, Beijing Wuzi University, Beijing, China
Kunlun Wang

School of information, Beijing Wuzi University, Beijing, China
Chaofan Su

School of information, Beijing Wuzi University, Beijing, China
Juntao Li

School of information, Beijing Wuzi University, Beijing, China

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Guicheng Shen, Kunlun Wang, Chaofan Su, Juntao Li. (2016). Application of Radio Frequency Identification Positioning Technology in Valuables Monitoring. International Journal of Intelligent Information Systems, 5(4), 55-59. https://doi.org/10.11648/j.ijiis.20160504.12

Copy | Download

ACS Style

Guicheng Shen; Kunlun Wang; Chaofan Su; Juntao Li. Application of Radio Frequency Identification Positioning Technology in Valuables Monitoring. Int. J. Intell. Inf. Syst. 2016, 5(4), 55-59. doi: 10.11648/j.ijiis.20160504.12

Copy | Download

AMA Style

Guicheng Shen, Kunlun Wang, Chaofan Su, Juntao Li. Application of Radio Frequency Identification Positioning Technology in Valuables Monitoring. Int J Intell Inf Syst. 2016;5(4):55-59. doi: 10.11648/j.ijiis.20160504.12

Copy | Download

@article{10.11648/j.ijiis.20160504.12,
  author = {Guicheng Shen and Kunlun Wang and Chaofan Su and Juntao Li},
  title = {Application of Radio Frequency Identification Positioning Technology in Valuables Monitoring},
  journal = {International Journal of Intelligent Information Systems},
  volume = {5},
  number = {4},
  pages = {55-59},
  doi = {10.11648/j.ijiis.20160504.12},
  url = {https://doi.org/10.11648/j.ijiis.20160504.12},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijiis.20160504.12},
  abstract = {With the development of positioning services, an increasing number of people and companies pay attention to the management and protection of the precious goods which they possess, through the determination of its location to achieve the management purpose [1]. At present, the main positioning way is to use the global positioning system (GPS), but many of the valuable items are stored in the indoor, and it's hard to receive a satellite signal in the room, so it cannot be accurate positioning. As a new short distance wireless data recognition technology at present, Radio Frequency Identification (RFID) indoor positioning technology is very suitable for the indoor positioning. Because it has many characteristics: large amount of data storage, readable and writable, strong penetrating power, long recognition distance, fast read-write speed and the use of the characteristics of long service life and good adaptability to the environment, etc. Among the RFID indoor positioning technology of many positioning algorithms, the three sides positioning algorithm is commonly used, and more mature. At the same time, the storage space of most valuable items is simple, and the environmental factors have little influence on the signal interference. So it is feasible to use the three sides positioning algorithm of RFID positioning algorithms to locate the valuables in the indoor.},
 year = {2016}
}

Copy | Download

TY  - JOUR
T1  - Application of Radio Frequency Identification Positioning Technology in Valuables Monitoring
AU  - Guicheng Shen
AU  - Kunlun Wang
AU  - Chaofan Su
AU  - Juntao Li
Y1  - 2016/08/01
PY  - 2016
N1  - https://doi.org/10.11648/j.ijiis.20160504.12
DO  - 10.11648/j.ijiis.20160504.12
T2  - International Journal of Intelligent Information Systems
JF  - International Journal of Intelligent Information Systems
JO  - International Journal of Intelligent Information Systems
SP  - 55
EP  - 59
PB  - Science Publishing Group
SN  - 2328-7683
UR  - https://doi.org/10.11648/j.ijiis.20160504.12
AB  - With the development of positioning services, an increasing number of people and companies pay attention to the management and protection of the precious goods which they possess, through the determination of its location to achieve the management purpose [1]. At present, the main positioning way is to use the global positioning system (GPS), but many of the valuable items are stored in the indoor, and it's hard to receive a satellite signal in the room, so it cannot be accurate positioning. As a new short distance wireless data recognition technology at present, Radio Frequency Identification (RFID) indoor positioning technology is very suitable for the indoor positioning. Because it has many characteristics: large amount of data storage, readable and writable, strong penetrating power, long recognition distance, fast read-write speed and the use of the characteristics of long service life and good adaptability to the environment, etc. Among the RFID indoor positioning technology of many positioning algorithms, the three sides positioning algorithm is commonly used, and more mature. At the same time, the storage space of most valuable items is simple, and the environmental factors have little influence on the signal interference. So it is feasible to use the three sides positioning algorithm of RFID positioning algorithms to locate the valuables in the indoor.
VL  - 5
IS  - 4
ER  -

Copy | Download