Inhibition Effect of Different Corrosion Inhibitors on Steel Bars Corrosion and Improvement Effect After Double Doped

Minghui Jiang; Meiyan Hang; Yubing Yang; Teng Cheng; Hao Wang; Gangming Zhou

doi:doi:10.11648/j.sjc.20210904.13

| Peer-Reviewed

Inhibition Effect of Different Corrosion Inhibitors on Steel Bars Corrosion and Improvement Effect After Double Doped

Minghui Jiang, Meiyan Hang, Yubing Yang, Teng Cheng, Hao Wang, Gangming Zhou

Published in Science Journal of Chemistry (Volume 9, Issue 4)

Received: 12 August 2021 Accepted: 26 August 2021 Published: 31 August 2021

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

Reinforced concrete structures are easily corroded in the Salt Lake areas of China, especially in harsh environmental circumstance, such as freezing-thawing cycles, wetting-dry, et al, thus causing a lot of damage problems (concrete deterioration and steel bars corrosion). This research investigation was a research study which was to solve the corrosion problem of reinforced concrete structures under the chloride environmental circumstance through the electrochemical performance and mechanical properties test of the reinforced mortar specimens, the effect of single or compound doping of two organic and two inorganic corrosion inhibitors to the electrode potential, electrochemical impedance spectroscopy and mechanical properties of the reinforced mortar were investigated. The experimental conclusion demonstrated that the organic or inorganic corrosion inhibitors after single and compound doping showed some degree influence on the electrode potential and mechanical properties of the reinforced mortar specimens. Meanwhile, when the ratio of triethanolamine (TEA):triisopropanolamine (TIPA) was 7:3, sodium monofluorophosphate (MFP):sodium molybdate was 5:5, the compressive strength and flexural strength of mortar after curing for 28 days were greater than 90%, it indicated that these proportions showed the best corrosion resistance performance of steel bars. Therefore, these proportions of corrosion inhibitors could be used in reinforced concrete structures. The significant was that these results could provide theoretical guidance and technical basis for the study of corrosion damage of reinforced concrete structures in the future.

Published in	Science Journal of Chemistry (Volume 9, Issue 4)
DOI	10.11648/j.sjc.20210904.13
Page(s)	105-112
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

Corrosion, Reinforced Concrete Structures, Corrosion Inhibitors, Electrochemical Performance

References

[1]	NACE, International measures of prevention, application and economics of corrosion technology, NACE International, 2016.
[2]	Sugama T., Carciello N. R. (2010). Corrosion protection of steel and bond durability at polyphenylene sulfide-to-anhydrous zinc phosphate interfaces [J]. Journal of Applied Polymer Science, 45 (7): 1291–1301.
[3]	Alawi A., Mohammed M., Baghabra A. A. O. S., Saleh T. A., Mohammed S. (2018). Efficiency of generic and proprietary inhibitors in mitigating Corrosion of Carbon Steel in Chloride-Sulfate Environments [J]. Reproductive Science, 8 (1): 11443.
[4]	Karagöl F., Yegin Y., Polat R., Benli A. (2018). The influence of lightweight aggregate, freezing–thawing procedure and air entraining agent on freezing–thawing damage [J]. Structural Concrete, 19 (5): 1328-1340.
[5]	Mehta P. K., Burrows R. W. (2001). Building durable structures in the 21st century. Concrete International, 75 (7): 437-443.
[6]	Miyagawa T. (1991). Durability design and repair of concrete structures: chloride corrosion of reinforcing steel and alkali-aggregate reaction [J]. Magazine of Concrete Research, 44: 147–147.
[7]	Asipita S. A., Ismail M., Majid M. Z. A., Majid Z. A., Abdullah C. S., Mirza J. (2014). Green Bambusa Arundinacea leaves extract as a sustainable corrosion inhibitor in steel reinforced concrete [J]. Journal of Cleaner Production, 67 (6): 139–146.
[8]	Cai J., Chen C., Liu J., Liu J. (2014). Corrosion resistance of carbon steel in simulated concrete pore solution in presence of 1-dihydroxyethylamino-3-dipropylamino-2-propanol as corrosion inhibitor [J]. British Corrosion Journal, 49 (1) 66–72.
[9]	Ahmad S. (2003). Reinforcement corrosion in concrete structures, its monitoring and service life prediction: a review [J]. Cement and Concrete Composites, 25 (4) 459–471.
[10]	Duffó G. S., Farina S. B., Giordano C. M. (2009). Characterization of solid embeddable reference electrodes for corrosion monitoring in reinforced concrete structures [J]. Electrochimical Acta, 54 (3): 1010–1020.
[11]	Dhouibi L., Triki E., Raharinaivo A. (2002). The application of electrochemical impedance spectroscopy to determine the long-term effectiveness of corrosion inhibitors for steel in concrete [J]. Cement and Concrete Composites, 24 (1): 35–43.
[12]	Glass G. K., Buenfeld N. R. (2000). The influence of chloride binding on the chloride induced corrosion risk in reinforced concrete [J]. Corrosion Science, 42 (2): 329–344.
[13]	Garcés P., Saura P., Zornoza E., Andrade C. (2011). Influence of pH on the nitrite corrosion inhibition of reinforcing steel in simulated concrete pore solution [J]. Corrosion Science, 53 (12): 3991–4000.
[14]	Chen C., Jiang L. H., Guo M. Z., Xu P., Chen L., Zha J. (2019). Effect of sulfate ions on corrosion of reinforced steel treated by DNA corrosion inhibitor in simulated concrete pore solution [J]. Construction and Building Materials, 228 (20): 116752.1-116752.8.
[15]	Zhou Y., Chen C. C., Cai J. S., Liu J. Z. (2016). Corrosion Behavior of Corrosion Resistant Reinforcing Steels and Their Synergistic Corrosion Resistant Effect with Corrosion Inhibitor [J]. Journal of Building Materials 19 (02): 379-384. (In Chinese).
[16]	Song J. L., Li Y. X., Xu W., Lu Y. (2019). Inexpensive and non-fluorinated superhydrophobic concrete coating for anti-icing and anti-corrosion [J]. Journal of Colloid and Interface Science, 541.
[17]	Ding R., Chen S., Lv J., Zhang W., Li W. H. (2019). Study on graphene modified organic anti-corrosion coatings: A comprehensive review [J]. Journal of Alloys Compdounds, 806: 611-635.
[18]	Xia Z. B., Liu G. Z., Dong Y. Q., Zhang Y. H. (2019). Anticorrosive epoxy coatings based on polydopamine modified molybdenum disulfide [J]. Progress in Organic Coatings, 133: 154-160.
[19]	Söylev T. A., Richardson M. G. (2006). Corrosion inhibitors for steel in concrete: State-of-the-art report [J]. Construction and Building Materials, 22 (4): 609-622.
[20]	Al-Amoudi O. S. B., Maslehuddin M., Lashari A. N., Almusallam A. A. (2003). Effectiveness of corrosion inhibitors in contaminated concrete [J]. Cement and Concrete Composites, 25 (4): 439–449.
[21]	Xu C., Jin W. L., Wang H. L., Wu H. T., Huang N., Li Z. Y., Mao J. H. (2016). Organic corrosion inhibitor of triethylenetetramine into chloride contamination concrete by eletro-injection method [J]. Construction and Building Materials, 115.
[22]	Tang Y. M., Zhang G. D., Zuo Y. (2011). The inhibition effects of several inhibitors on steel bar in acidified concrete pore solution [J]. Construction and Building Materials, 28 (1): 327-332.
[23]	Qian S., Cusson D. (2004). Electrochemical evaluation of the performance of corrosion- inhibiting systems in concrete bridges [J]. Cement and Concrete Composites, 26: 217–233.
[24]	Liu J. P., Chen C. C., Cai J. S., Liu J. Z., Cui G. (2013). 1,3-Bis-dibutylaminopropan-2-ol as inhibitor for reinforcement steel in chloride-contaminated simulated concrete pore solution[J]. Materials and Corrosion. 64 (12): 1075–1081.
[25]	Wang J., Ma B. G., Tan H. B. (2021). Hydration and mechanical properties of cement-marble powder system incorporating triisopropanolamine [J]. Construction and Building Materials, 266 (PB): 121068.
[26]	Heinz D., Göbel M., Hilbig H., Urbonas L., Bujauskaite G. (2010). Effect of TEA on fly ash solubility and early age strength of mortar [J]. Cement and Concrete Research. 40 (3): 392– 397.
[27]	Katsioti M., Tsakiridis P. E., Giannatos P., Tsibouki Z., Marinos J. (2009). Characterization of various cement grinding aids and their impact on grindability and cement performance [J]. Construction and Building Materials, 23 (5): 1954–1959.
[28]	Shaikh F. U. A., Supit S. W. M. (2014). Mechanical and durability properties of high volume fly ash (HVFA) concrete containing calcium carbonate (CaCO₃) nanoparticles [J]. Construction and Building Materials, 70: 309–321.
[29]	Jamil H. E., Shriri A., Boulif R., Bastos C., Montemor M. F., Ferreira M. G. S. (2004) Electrochemical behaviour of amino alcohol-based inhibitors used to control corrosion of reinforcing steel [J]. Electrochemical Acta, 49: 2753–2760.
[30]	Chaussadent T., Nobel-Pujol V., Farcas F., Mabille I., Fiaud C. (2006). Effectiveness conditions of sodium monofluorophosphate as a corrosion inhibitor for concrete reinforcements [J]. Cement and Concrete Research, 36 (3): 556-561.
[31]	Li X., Deng S., Hui F. (2011). Sodium molybdate as a corrosion inhibitor for aluminium in H3PO4 solution [J]. Corrosion Science, 53 (9): 2748–2753.

Cite This Article

Plain Text BibTeX RIS

APA Style

Minghui Jiang, Meiyan Hang, Yubing Yang, Teng Cheng, Hao Wang, et al. (2021). Inhibition Effect of Different Corrosion Inhibitors on Steel Bars Corrosion and Improvement Effect After Double Doped. Science Journal of Chemistry, 9(4), 105-112. https://doi.org/10.11648/j.sjc.20210904.13

Copy | Download

ACS Style

Minghui Jiang; Meiyan Hang; Yubing Yang; Teng Cheng; Hao Wang, et al. Inhibition Effect of Different Corrosion Inhibitors on Steel Bars Corrosion and Improvement Effect After Double Doped. Sci. J. Chem. 2021, 9(4), 105-112. doi: 10.11648/j.sjc.20210904.13

Copy | Download

AMA Style

Minghui Jiang, Meiyan Hang, Yubing Yang, Teng Cheng, Hao Wang, et al. Inhibition Effect of Different Corrosion Inhibitors on Steel Bars Corrosion and Improvement Effect After Double Doped. Sci J Chem. 2021;9(4):105-112. doi: 10.11648/j.sjc.20210904.13

Copy | Download

@article{10.11648/j.sjc.20210904.13,
  author = {Minghui Jiang and Meiyan Hang and Yubing Yang and Teng Cheng and Hao Wang and Gangming Zhou},
  title = {Inhibition Effect of Different Corrosion Inhibitors on Steel Bars Corrosion and Improvement Effect After Double Doped},
  journal = {Science Journal of Chemistry},
  volume = {9},
  number = {4},
  pages = {105-112},
  doi = {10.11648/j.sjc.20210904.13},
  url = {https://doi.org/10.11648/j.sjc.20210904.13},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.sjc.20210904.13},
  abstract = {Reinforced concrete structures are easily corroded in the Salt Lake areas of China, especially in harsh environmental circumstance, such as freezing-thawing cycles, wetting-dry, et al, thus causing a lot of damage problems (concrete deterioration and steel bars corrosion). This research investigation was a research study which was to solve the corrosion problem of reinforced concrete structures under the chloride environmental circumstance through the electrochemical performance and mechanical properties test of the reinforced mortar specimens, the effect of single or compound doping of two organic and two inorganic corrosion inhibitors to the electrode potential, electrochemical impedance spectroscopy and mechanical properties of the reinforced mortar were investigated. The experimental conclusion demonstrated that the organic or inorganic corrosion inhibitors after single and compound doping showed some degree influence on the electrode potential and mechanical properties of the reinforced mortar specimens. Meanwhile, when the ratio of triethanolamine (TEA):triisopropanolamine (TIPA) was 7:3, sodium monofluorophosphate (MFP):sodium molybdate was 5:5, the compressive strength and flexural strength of mortar after curing for 28 days were greater than 90%, it indicated that these proportions showed the best corrosion resistance performance of steel bars. Therefore, these proportions of corrosion inhibitors could be used in reinforced concrete structures. The significant was that these results could provide theoretical guidance and technical basis for the study of corrosion damage of reinforced concrete structures in the future.},
 year = {2021}
}

Copy | Download

TY  - JOUR
T1  - Inhibition Effect of Different Corrosion Inhibitors on Steel Bars Corrosion and Improvement Effect After Double Doped
AU  - Minghui Jiang
AU  - Meiyan Hang
AU  - Yubing Yang
AU  - Teng Cheng
AU  - Hao Wang
AU  - Gangming Zhou
Y1  - 2021/08/31
PY  - 2021
N1  - https://doi.org/10.11648/j.sjc.20210904.13
DO  - 10.11648/j.sjc.20210904.13
T2  - Science Journal of Chemistry
JF  - Science Journal of Chemistry
JO  - Science Journal of Chemistry
SP  - 105
EP  - 112
PB  - Science Publishing Group
SN  - 2330-099X
UR  - https://doi.org/10.11648/j.sjc.20210904.13
AB  - Reinforced concrete structures are easily corroded in the Salt Lake areas of China, especially in harsh environmental circumstance, such as freezing-thawing cycles, wetting-dry, et al, thus causing a lot of damage problems (concrete deterioration and steel bars corrosion). This research investigation was a research study which was to solve the corrosion problem of reinforced concrete structures under the chloride environmental circumstance through the electrochemical performance and mechanical properties test of the reinforced mortar specimens, the effect of single or compound doping of two organic and two inorganic corrosion inhibitors to the electrode potential, electrochemical impedance spectroscopy and mechanical properties of the reinforced mortar were investigated. The experimental conclusion demonstrated that the organic or inorganic corrosion inhibitors after single and compound doping showed some degree influence on the electrode potential and mechanical properties of the reinforced mortar specimens. Meanwhile, when the ratio of triethanolamine (TEA):triisopropanolamine (TIPA) was 7:3, sodium monofluorophosphate (MFP):sodium molybdate was 5:5, the compressive strength and flexural strength of mortar after curing for 28 days were greater than 90%, it indicated that these proportions showed the best corrosion resistance performance of steel bars. Therefore, these proportions of corrosion inhibitors could be used in reinforced concrete structures. The significant was that these results could provide theoretical guidance and technical basis for the study of corrosion damage of reinforced concrete structures in the future.
VL  - 9
IS  - 4
ER  -

Copy | Download

Author Information

Minghui Jiang

School of Civil Engineering, Inner Mongolia University of Science and Technology, Baotou, China
Meiyan Hang

School of Civil Engineering, Inner Mongolia University of Science and Technology, Baotou, China
Yubing Yang

School of Civil Engineering, Inner Mongolia University of Science and Technology, Baotou, China
Teng Cheng

School of Civil Engineering, Inner Mongolia University of Science and Technology, Baotou, China
Hao Wang

School of Civil Engineering, Inner Mongolia University of Science and Technology, Baotou, China
Gangming Zhou

Beijing Tieke Shougang Rail Technology Co., Ltd, Beijing, China

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Minghui Jiang, Meiyan Hang, Yubing Yang, Teng Cheng, Hao Wang, et al. (2021). Inhibition Effect of Different Corrosion Inhibitors on Steel Bars Corrosion and Improvement Effect After Double Doped. Science Journal of Chemistry, 9(4), 105-112. https://doi.org/10.11648/j.sjc.20210904.13

Copy | Download

ACS Style

Minghui Jiang; Meiyan Hang; Yubing Yang; Teng Cheng; Hao Wang, et al. Inhibition Effect of Different Corrosion Inhibitors on Steel Bars Corrosion and Improvement Effect After Double Doped. Sci. J. Chem. 2021, 9(4), 105-112. doi: 10.11648/j.sjc.20210904.13

Copy | Download

AMA Style

Minghui Jiang, Meiyan Hang, Yubing Yang, Teng Cheng, Hao Wang, et al. Inhibition Effect of Different Corrosion Inhibitors on Steel Bars Corrosion and Improvement Effect After Double Doped. Sci J Chem. 2021;9(4):105-112. doi: 10.11648/j.sjc.20210904.13

Copy | Download

@article{10.11648/j.sjc.20210904.13,
  author = {Minghui Jiang and Meiyan Hang and Yubing Yang and Teng Cheng and Hao Wang and Gangming Zhou},
  title = {Inhibition Effect of Different Corrosion Inhibitors on Steel Bars Corrosion and Improvement Effect After Double Doped},
  journal = {Science Journal of Chemistry},
  volume = {9},
  number = {4},
  pages = {105-112},
  doi = {10.11648/j.sjc.20210904.13},
  url = {https://doi.org/10.11648/j.sjc.20210904.13},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.sjc.20210904.13},
  abstract = {Reinforced concrete structures are easily corroded in the Salt Lake areas of China, especially in harsh environmental circumstance, such as freezing-thawing cycles, wetting-dry, et al, thus causing a lot of damage problems (concrete deterioration and steel bars corrosion). This research investigation was a research study which was to solve the corrosion problem of reinforced concrete structures under the chloride environmental circumstance through the electrochemical performance and mechanical properties test of the reinforced mortar specimens, the effect of single or compound doping of two organic and two inorganic corrosion inhibitors to the electrode potential, electrochemical impedance spectroscopy and mechanical properties of the reinforced mortar were investigated. The experimental conclusion demonstrated that the organic or inorganic corrosion inhibitors after single and compound doping showed some degree influence on the electrode potential and mechanical properties of the reinforced mortar specimens. Meanwhile, when the ratio of triethanolamine (TEA):triisopropanolamine (TIPA) was 7:3, sodium monofluorophosphate (MFP):sodium molybdate was 5:5, the compressive strength and flexural strength of mortar after curing for 28 days were greater than 90%, it indicated that these proportions showed the best corrosion resistance performance of steel bars. Therefore, these proportions of corrosion inhibitors could be used in reinforced concrete structures. The significant was that these results could provide theoretical guidance and technical basis for the study of corrosion damage of reinforced concrete structures in the future.},
 year = {2021}
}

Copy | Download

TY  - JOUR
T1  - Inhibition Effect of Different Corrosion Inhibitors on Steel Bars Corrosion and Improvement Effect After Double Doped
AU  - Minghui Jiang
AU  - Meiyan Hang
AU  - Yubing Yang
AU  - Teng Cheng
AU  - Hao Wang
AU  - Gangming Zhou
Y1  - 2021/08/31
PY  - 2021
N1  - https://doi.org/10.11648/j.sjc.20210904.13
DO  - 10.11648/j.sjc.20210904.13
T2  - Science Journal of Chemistry
JF  - Science Journal of Chemistry
JO  - Science Journal of Chemistry
SP  - 105
EP  - 112
PB  - Science Publishing Group
SN  - 2330-099X
UR  - https://doi.org/10.11648/j.sjc.20210904.13
AB  - Reinforced concrete structures are easily corroded in the Salt Lake areas of China, especially in harsh environmental circumstance, such as freezing-thawing cycles, wetting-dry, et al, thus causing a lot of damage problems (concrete deterioration and steel bars corrosion). This research investigation was a research study which was to solve the corrosion problem of reinforced concrete structures under the chloride environmental circumstance through the electrochemical performance and mechanical properties test of the reinforced mortar specimens, the effect of single or compound doping of two organic and two inorganic corrosion inhibitors to the electrode potential, electrochemical impedance spectroscopy and mechanical properties of the reinforced mortar were investigated. The experimental conclusion demonstrated that the organic or inorganic corrosion inhibitors after single and compound doping showed some degree influence on the electrode potential and mechanical properties of the reinforced mortar specimens. Meanwhile, when the ratio of triethanolamine (TEA):triisopropanolamine (TIPA) was 7:3, sodium monofluorophosphate (MFP):sodium molybdate was 5:5, the compressive strength and flexural strength of mortar after curing for 28 days were greater than 90%, it indicated that these proportions showed the best corrosion resistance performance of steel bars. Therefore, these proportions of corrosion inhibitors could be used in reinforced concrete structures. The significant was that these results could provide theoretical guidance and technical basis for the study of corrosion damage of reinforced concrete structures in the future.
VL  - 9
IS  - 4
ER  -

Copy | Download