Given the significance of improving heat transfer in thermal engineering equipment, researchers in this field have developed numerous methods for heat transfer improvement. These methods are classified as active and passive. Several researchers consider the use of forced vibration in improving heat transfer to be one of the most significant topics in the applied field. This is because some thermal equipment has this feature due to its nature. As a result, the current study emphasizes research dealing with mechanical vibration in enhancing heat transfer in free convection conditions. The results of these studies agreed that heat transfer by free convection and vibration contributed to improving the thermal performance of thermal equipment compared to its at-rest condition. These studies' findings indicate an increased heat transfer coefficient as frequency is raised, particularly in forced convection heat transfer. However, the limited vibration amplitude has an impact on heat transfer. In some studies, the fin slope was studied in addition to vibration. These studies showed that fin tilting reduces heat transfer optimization value with fin tendencies that produce vibrations. Furthermore, while the vibration process does enhance heat transfer capacity, it is accompanied by certain drawbacks. These include the generation of noise, which can disturbance to humans, as well as potential damage to mechanical components of the equipment.
| Published in | American Journal of Science, Engineering and Technology (Volume 8, Issue 3) |
| DOI | 10.11648/j.ajset.20230803.16 |
| Page(s) | 162-172 |
| Creative Commons |
This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited. |
| Copyright |
Copyright © The Author(s), 2023. Published by Science Publishing Group |
Improving Heat Transfer, Vibration, Heat Sinks, Thermal Efficiency, Natural Convection
| [1] | A. Maji and G. Choubey, “Improvement of heat transfer through fins: A brief review of recent developments,” Heat Transf., vol. 49, no. 3, 2020. |
| [2] | W. M. A. A. Japar, N. A. C. Sidik, R. Saidur, Y. Asako, and S. Nurul Akmal Yusof, “A review of passive methods in microchannel heat sink application through advanced geometric structure and nanofluids: Current advancements and challenges,” Nanotechnology Reviews, vol. 9, no. 1. 2020. |
| [3] | A. A. Sertkaya, M. Ozdemir, and E. Canli, “Effects of pin fin height, spacing and orientation to natural convection heat transfer for inline pin fin and plate heat sinks by experimental investigation,” Int. J. Heat Mass Transf., vol. 177, 2021. |
| [4] | S. Unger, M. Beyer, J. Thiele, and U. Hampel, “Experimental study of the natural convection heat transfer performance for finned oval tubes at different tube tilt angles,” Exp. Therm. Fluid Sci., vol. 105, 2019. |
| [5] | S. Gururatana and X. Li, “Heat transfer enhancement of small scale heat sinks using vibrating pin fin,” Am. J. Appl. Sci., vol. 10, no. 8, 2013. |
| [6] | S. G. Park, B. Kim, C. B. Chang, J. Ryu, and H. J. Sung, “Enhancement of heat transfer by a self-oscillating inverted flag in a Poiseuille channel flow,” Int. J. Heat Mass Transf., vol. 96, pp. 362–370, 2016, doi: 10.1016/j.ijheatmasstransfer.2016.01.043. |
| [7] | M. Ghalambaz, E. Jamesahar, M. A. Ismael, and A. J. Chamkha, “Fluid-structure interaction study of natural convection heat transfer over a flexible oscillating fin in a square cavity,” Int. J. Therm. Sci., vol. 111, pp. 256–273, 2017, doi: 10.1016/j.ijthermalsci.2016.09.001. |
| [8] | A. Rahman and D. Tafti, “Characterization of heat transfer enhancement for an oscillating flat plate-fin,” Int. J. Heat Mass Transf., vol. 147, 2020. |
| [9] | J. Ji et al., “Numerical Research on Vibration-Enhanced Heat Transfer of Elastic Scroll Tube Bundle,” J. Thermophys. Heat Transf., vol. 36, no. 1, pp. 61–68, 2022, doi: 10.2514/1.T6261. |
| [10] | J. Ji, X. Deng, J. Zhang, F. Li, and R. Zhou, “Study on Vibration and Heat Transfer Performances of a Modified Elastic Tube Bundle Heat Exchanger,” J. Phys. Conf. Ser., vol. 2181, no. 1, 2022, doi: 10.1088/1742-6596/2181/1/012043. |
| [11] | A. H. D. K. Rasangika, M. S. Nasif, W. Pao, and R. Al-Waked, “Numerical Investigation of the Effect of Square and Sinusoidal Waves Vibration Parameters on Heat Sink Forced Convective Heat Transfer Enhancement,” Appl. Sci., vol. 12, no. 10, 2022, doi: 10.3390/app12104911. |
| [12] | P. K. Nag and A. Bhattacharya, “Effect of vibration on natural convection heat transfer from vertical fin arrays,” Lett. Heat Mass Transf., vol. 9, no. 6, 1982. |
| [13] | J. S. Go, “Design of a microfin array heat sink using flow-induced vibration to enhance the heat transfer in the laminar flow regime,” Sensors Actuators, A Phys., vol. 105, no. 2, pp. 201–210, 2003, doi: 10.1016/S0924-4247(03)00101-8. |
| [14] | M. H. M. Al-Shorafa, “A Study of Influence of Vertical Vibration on Heat Transfer Coefficient From Horizontal Cylinders,” Journal of Engineering, vol. 14, no. March. 2008. |
| [15] | E. I. Eid and M. E. Gomaa, “Influence of vibration in enhancement of heat transfer rates from thin plannar fins,” Heat Mass Transf. und Stoffuebertragung, vol. 45, no. 6, 2009. |
| [16] | Z. K. Kadhim, “Experimental study of the effect of vertical vibrations on forced convection heat transfer coefficient from circumferentially finned cylinder,” Eng. Technol. J., vol. 28, no. 17, pp. 814–833, Aug. 2010. |
| [17] | A. R. Sarhan, “Vertical Forced Vibration Effect on Natural Convective Performance of Longitudinal Fin Heat Sinks,” Tikrit Journal of Engineering Sciences, Vol. 20, no. 2, 2013. |
| [18] | C. P. Saini and S. Kumar, “Effect of Vibration on Heat Transfer Enhancement in a Rectangular Channel Heat Exchanger,” Natl. Conf. Adv. Eng. Technoiogy Manag., 2015. |
| [19] | A. K. Pandey, P. C. Pant, O. S. Sastry, A. Kumar, and S. K. Tyagi, “Energy and exergy performance evaluation of a typical solar photovoltaic module,” Therm. Sci., vol. 19, 2015. |
| [20] | S. K. Kadhim and M. S. Nasif, “Experimental investigation of the effect vertical oscillation on the heat transfer coefficient of the finned tube,” in MATEC Web of Conferences, 2016, vol. 38. |
| [21] | A. H. & A. H. M. Isfahani, “- Experimental study of heat transfer enhancement due to the surface vibrations in a flexible double pipe heat exchanger,” Heat Mass Transf., vol. 54, 2018, doi: 10.1007/s00231-017-2213-2. |
| [22] | S. W. Chen et al., “Experimental test and empirical correlation development for heat transfer enhancement under ultrasonic vibration,” Appl. Therm. Eng., vol. 143, pp. 639–649, 2018, doi: 10.1016/j.applthermaleng.2018.07.133. |
| [23] | S. S. Haghighi, H. R. Goshayeshi, and M. R. Safaei, “Natural convection heat transfer enhancement in new designs of plate-fin based heat sinks,” Int. J. Heat Mass Transf., vol. 125, 2018. |
| [24] | M. K. Bassiouny, A. E. Kabeel, A. Khalil, Y. A. F. El Samadony, and A. M. Khaira, “Heat Transfer Performance of a Gasketed Plate Heat Exchanger using Nanofluid and Subject to Vibration as a Combined Augmentation Techniques,” J. Eng. Res., vol. 3, no. 2, pp. 1–10, 2019, doi: 10.21608/ERJENG.2019.125499. |
| [25] | B. S. Rao and S. Ravi Babu, “Experimental Investigation on Natural Convection Heat Transfer Augmentation with Vibration Effect,” Int. Res. J. Eng. Technol., vol. 6, no. 8, 2019. |
| [26] | P. Kumar, S. Khandekar, Y. F. Maydanik, and B. Bhattacharya, “Effect of vibrations on thermal performance of miniature loop heat pipe for avionics cooling: An experimental analysis,” J. Heat Transfer, vol. 141, no. 9, 2019, doi: 10.1115/1.4044466. |
| [27] | H. Al sultan, A. Soltan, and H. El-Tahan, “Natural Convection Heat Transfer from Vibrated Vertical Flat plate.,” Bull. Fac. Eng. Mansoura Univ., vol. 40, no. 1, 2020. |
| [28] | S. Akcay, U. Akdag, and H. Palancioglu, “Experimental investigation of mixed convection on an oscillating vertical flat plate,” Int. Commun. Heat Mass Transf., vol. 113, 2020. |
| [29] | M. M. Al-Azzawi, H. M. Hussain, and L. J. Habeeb, “An experimental study on the influence of forced vibration on longitudinal fins heat sink subjected to free convection heat transfer,” J. Mech. Eng. Res. Dev., vol. 43, no. 7, 2020. |
| [30] | M. M. Al-Azzawi, A. R. Abdullah, B. M. Majel, and L. J. Habeeb, “Experimental investigation of the effect of forced vibration on natural convection heat transfer in a concentric vertical cylinder,” J. Mech. Eng. Res. Dev., vol. 44, no. 3, 2021. |
| [31] | S. K. Kadhim, S. A. Ali, N. F. D. Razak, and M. S. M. Sani, “Vertical Vibrations Effect on Forced convection heat transfer from a Longitudinal Finned Tube,” in IOP Conference Series: Materials Science and Engineering, 2021, vol. 1062, no. 1. |
| [32] | H. Xie, B. Yu, J. Wang, and J. Ji, “A novel disinfected Trombe wall for space heating and virus inactivation: Concept and performance investigation,” Appl. Energy, vol. 291, Jun. 2021. |
| [33] | B. K. Khudhair, A. M. Salh, and A. Ekaid, “Vibration Effect on Natural Convection Heat Transfer in an Inclosed Cubic Cavity,” IOP Conf. Ser. Mater. Sci. Eng., vol. 1094, no. 1, 2021. |
| [34] | A. Amiri Delouei, H. Sajjadi, and G. Ahmadi, “Ultrasonic Vibration Technology to Improve the Thermal Performance of CPU Water-Cooling Systems: Experimental Investigation,” Water (Switzerland), vol. 14, no. 24, 2022, doi: 10.3390/w14244000. |
| [35] | L. Cheng, T. Luan, W. Du, and M. Xu, “International Journal of Heat and Mass Transfer Heat transfer enhancement by flow-induced vibration in heat exchangers,” International Journal of Heat and Mass Transfer, vol. 52, no. 3–4. pp. 1053–1057, 2009. [Online]. Available: http://dx.doi.org/10.1016/j.ijheatmasstransfer.2008.05.037 |
| [36] | D. G. M. I. Y. Hussain, K. E. Amori, “An Investigation into Heat Transfer Enhancement by Using Oscillating Fins,” J. Eng., vol. 19, no. 1, 2013. |
| [37] | M. Setareh, M. Saffar-Avval, and A. Abdullah, “Experimental and numerical study on heat transfer enhancement using ultrasonic vibration in a double-pipe heat exchanger,” Appl. Therm. Eng., vol. 159, no. April, 2019, doi: 10.1016/j.applthermaleng.2019.113867. |
| [38] | D. Li et al., “Experimental research on vibration-enhanced heat transfer of fin-tube vehicle radiator,” Appl. Therm. Eng., vol. 180, 2020. |
| [39] | S. Akcay and U. Akdag, “Mixed convection heat transfer from a vertical flat plate subjected to periodic oscillations,” J. Therm. Eng., vol. 7, no. 6, 2021. |
| [40] | X. Y. Derong Duan, Yujun Cheng, Mengran Ge, Wenbo Bi, Peiqi Ge, “Experimental and numerical study on heat transfer enhancement by Flow-induced vibration in pulsating flow,” Appl. Therm. Eng., vol. 207, no. 118171, 2022. |
APA Style
Furqan Haider Mohammed Ali, Ehsan Fadhil Abbas, Iesam Jondi Hasan, Shahen Mohammed Fakhraldin. (2023). Using Mechanical Vibration to Enhance Heat Transfer on an Extended Surface: A Review Study. American Journal of Science, Engineering and Technology, 8(3), 162-172. https://doi.org/10.11648/j.ajset.20230803.16
ACS Style
Furqan Haider Mohammed Ali; Ehsan Fadhil Abbas; Iesam Jondi Hasan; Shahen Mohammed Fakhraldin. Using Mechanical Vibration to Enhance Heat Transfer on an Extended Surface: A Review Study. Am. J. Sci. Eng. Technol. 2023, 8(3), 162-172. doi: 10.11648/j.ajset.20230803.16
AMA Style
Furqan Haider Mohammed Ali, Ehsan Fadhil Abbas, Iesam Jondi Hasan, Shahen Mohammed Fakhraldin. Using Mechanical Vibration to Enhance Heat Transfer on an Extended Surface: A Review Study. Am J Sci Eng Technol. 2023;8(3):162-172. doi: 10.11648/j.ajset.20230803.16
Share This Article
Twitter
Linked In
Facebook
Copy
Download@article{10.11648/j.ajset.20230803.16,
author = {Furqan Haider Mohammed Ali and Ehsan Fadhil Abbas and Iesam Jondi Hasan and Shahen Mohammed Fakhraldin},
title = {Using Mechanical Vibration to Enhance Heat Transfer on an Extended Surface: A Review Study},
journal = {American Journal of Science, Engineering and Technology},
volume = {8},
number = {3},
pages = {162-172},
doi = {10.11648/j.ajset.20230803.16},
url = {https://doi.org/10.11648/j.ajset.20230803.16},
eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajset.20230803.16},
abstract = {Given the significance of improving heat transfer in thermal engineering equipment, researchers in this field have developed numerous methods for heat transfer improvement. These methods are classified as active and passive. Several researchers consider the use of forced vibration in improving heat transfer to be one of the most significant topics in the applied field. This is because some thermal equipment has this feature due to its nature. As a result, the current study emphasizes research dealing with mechanical vibration in enhancing heat transfer in free convection conditions. The results of these studies agreed that heat transfer by free convection and vibration contributed to improving the thermal performance of thermal equipment compared to its at-rest condition. These studies' findings indicate an increased heat transfer coefficient as frequency is raised, particularly in forced convection heat transfer. However, the limited vibration amplitude has an impact on heat transfer. In some studies, the fin slope was studied in addition to vibration. These studies showed that fin tilting reduces heat transfer optimization value with fin tendencies that produce vibrations. Furthermore, while the vibration process does enhance heat transfer capacity, it is accompanied by certain drawbacks. These include the generation of noise, which can disturbance to humans, as well as potential damage to mechanical components of the equipment.},
year = {2023}
}
TY - JOUR T1 - Using Mechanical Vibration to Enhance Heat Transfer on an Extended Surface: A Review Study AU - Furqan Haider Mohammed Ali AU - Ehsan Fadhil Abbas AU - Iesam Jondi Hasan AU - Shahen Mohammed Fakhraldin Y1 - 2023/08/28 PY - 2023 N1 - https://doi.org/10.11648/j.ajset.20230803.16 DO - 10.11648/j.ajset.20230803.16 T2 - American Journal of Science, Engineering and Technology JF - American Journal of Science, Engineering and Technology JO - American Journal of Science, Engineering and Technology SP - 162 EP - 172 PB - Science Publishing Group SN - 2578-8353 UR - https://doi.org/10.11648/j.ajset.20230803.16 AB - Given the significance of improving heat transfer in thermal engineering equipment, researchers in this field have developed numerous methods for heat transfer improvement. These methods are classified as active and passive. Several researchers consider the use of forced vibration in improving heat transfer to be one of the most significant topics in the applied field. This is because some thermal equipment has this feature due to its nature. As a result, the current study emphasizes research dealing with mechanical vibration in enhancing heat transfer in free convection conditions. The results of these studies agreed that heat transfer by free convection and vibration contributed to improving the thermal performance of thermal equipment compared to its at-rest condition. These studies' findings indicate an increased heat transfer coefficient as frequency is raised, particularly in forced convection heat transfer. However, the limited vibration amplitude has an impact on heat transfer. In some studies, the fin slope was studied in addition to vibration. These studies showed that fin tilting reduces heat transfer optimization value with fin tendencies that produce vibrations. Furthermore, while the vibration process does enhance heat transfer capacity, it is accompanied by certain drawbacks. These include the generation of noise, which can disturbance to humans, as well as potential damage to mechanical components of the equipment. VL - 8 IS - 3 ER -
Information
Email: