Research on FeO Content of Sinter

Hu Qichen; Wu Chunliang; Sun Jianghuan; Wang Na; Hu Binsheng

doi:doi:10.11648/j.ijmpem.20190401.11

| Peer-Reviewed

Research on FeO Content of Sinter

Hu Qichen, Wu Chunliang, Sun Jianghuan, Wang Na, Hu Binsheng

Published in International Journal of Mineral Processing and Extractive Metallurgy (Volume 4, Issue 1)

Received: 11 December 2018 Accepted: 2 January 2019 Published: 15 February 2019

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

The FeO content of sinter is the key role for sinter quality, carbon consumption and production cost. And it has great effect on production status, fuel ratio and hot metal output of blast furnace. According to the relevant national standards and industry standards, the particle size, reducibility, drum strength, fuel ratio of sinter and BF production status in Tangsteel iron-making plant were analyzed in this paper. It is found that the optimal range of FeO content in Tangsteel is from 8.0 to 8.5 wt. %.

Published in	International Journal of Mineral Processing and Extractive Metallurgy (Volume 4, Issue 1)
DOI	10.11648/j.ijmpem.20190401.11
Page(s)	1-6
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2019. Published by Science Publishing Group

Keywords

Sinter, FeO, Drum Strength, Fuel Ratio

References

[1]	Seah M P, Hordros E. Grain Boundary Segregation [J]. Proy. Roy. Soc. 1973, (335): 191-212.
[2]	Liu zhulin. Study on influencing factors of FeO content in sinter [J]. Journal of chongqing institute of technology, 2005, 7 (1): 8-13.
[3]	Mu jiyao. Soft melting properties of high alkalinity sinter [J]. Sintered pellets, 1986, (6): 17-23.
[4]	Wang changqiu, wukeng, houenjian, etc. Study on sintering carbon distribution and mineral distribution of thick material layer in east burning plant of anshan iron & steel [J]. Journal of steel research, 2010, (6) : 14-17.
[5]	Nachtrab W T, Chou Y T. High Temperature Ductility Loss incarb-manganese and niobium-treated Steel [J]. Metall. Trans. A, 1986, 17A (11): 1995-2006.
[6]	Yin DE, li qiumei. Research and production practice of influencing factors of sinter FeO [J]. Sinter pellets, 1999 (5) : 31-33.
[7]	Dai shuping, zhoulei. Effect of FeO content on mineral composition and microstructure of sinter [J]. Metal world, 2011, (6): 32-34.
[8]	Huang yijun. Relationship between sinter FeO content and sinter production and quality [J]. Sinter pellets, 1980, (1) : 17-26.
[9]	Cheng zhenxian. Several questions about FeO in the sinter [J]. Sintered pellets.1983, (3): 33-38.
[10]	Shan jiguo. Study on low temperature reduction degradation of sinter [J]. Sintered pellets, 1989, (2) : 15-18.
[11]	Zhang ling. Reduction of FeO content in sinter to improve metallurgical properties of sinter [J]. Jiangsu metallurgy, 1998, (3): 32-33.

Cite This Article

Plain Text BibTeX RIS

APA Style

Hu Qichen, Wu Chunliang, Sun Jianghuan, Wang Na, Hu Binsheng. (2019). Research on FeO Content of Sinter. International Journal of Mineral Processing and Extractive Metallurgy, 4(1), 1-6. https://doi.org/10.11648/j.ijmpem.20190401.11

Copy | Download

ACS Style

Hu Qichen; Wu Chunliang; Sun Jianghuan; Wang Na; Hu Binsheng. Research on FeO Content of Sinter. Int. J. Miner. Process. Extr. Metall. 2019, 4(1), 1-6. doi: 10.11648/j.ijmpem.20190401.11

Copy | Download

AMA Style

Hu Qichen, Wu Chunliang, Sun Jianghuan, Wang Na, Hu Binsheng. Research on FeO Content of Sinter. Int J Miner Process Extr Metall. 2019;4(1):1-6. doi: 10.11648/j.ijmpem.20190401.11

Copy | Download

@article{10.11648/j.ijmpem.20190401.11,
  author = {Hu Qichen and Wu Chunliang and Sun Jianghuan and Wang Na and Hu Binsheng},
  title = {Research on FeO Content of Sinter},
  journal = {International Journal of Mineral Processing and Extractive Metallurgy},
  volume = {4},
  number = {1},
  pages = {1-6},
  doi = {10.11648/j.ijmpem.20190401.11},
  url = {https://doi.org/10.11648/j.ijmpem.20190401.11},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijmpem.20190401.11},
  abstract = {The FeO content of sinter is the key role for sinter quality, carbon consumption and production cost. And it has great effect on production status, fuel ratio and hot metal output of blast furnace. According to the relevant national standards and industry standards, the particle size, reducibility, drum strength, fuel ratio of sinter and BF production status in Tangsteel iron-making plant were analyzed in this paper. It is found that the optimal range of FeO content in Tangsteel is from 8.0 to 8.5 wt. %.},
 year = {2019}
}

Copy | Download

TY  - JOUR
T1  - Research on FeO Content of Sinter
AU  - Hu Qichen
AU  - Wu Chunliang
AU  - Sun Jianghuan
AU  - Wang Na
AU  - Hu Binsheng
Y1  - 2019/02/15
PY  - 2019
N1  - https://doi.org/10.11648/j.ijmpem.20190401.11
DO  - 10.11648/j.ijmpem.20190401.11
T2  - International Journal of Mineral Processing and Extractive Metallurgy
JF  - International Journal of Mineral Processing and Extractive Metallurgy
JO  - International Journal of Mineral Processing and Extractive Metallurgy
SP  - 1
EP  - 6
PB  - Science Publishing Group
SN  - 2575-1859
UR  - https://doi.org/10.11648/j.ijmpem.20190401.11
AB  - The FeO content of sinter is the key role for sinter quality, carbon consumption and production cost. And it has great effect on production status, fuel ratio and hot metal output of blast furnace. According to the relevant national standards and industry standards, the particle size, reducibility, drum strength, fuel ratio of sinter and BF production status in Tangsteel iron-making plant were analyzed in this paper. It is found that the optimal range of FeO content in Tangsteel is from 8.0 to 8.5 wt. %.
VL  - 4
IS  - 1
ER  -

Copy | Download

Author Information

Hu Qichen

Iron and Steel Research Institute of HBIS Group, Shijiazhuang, P. R. China
Wu Chunliang

Research Institute for Hebei Vanadium Titanium Industry Technology, Chengde, P. R. China
Sun Jianghuan

Iron and Steel Research Institute of HBIS Group, Shijiazhuang, P. R. China
Wang Na

Research Institute for Hebei Vanadium Titanium Industry Technology, Chengde, P. R. China
Hu Binsheng

School of Metallurgical and Energy, Hebei United University, Tangshan, P. R. China

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Hu Qichen, Wu Chunliang, Sun Jianghuan, Wang Na, Hu Binsheng. (2019). Research on FeO Content of Sinter. International Journal of Mineral Processing and Extractive Metallurgy, 4(1), 1-6. https://doi.org/10.11648/j.ijmpem.20190401.11

Copy | Download

ACS Style

Hu Qichen; Wu Chunliang; Sun Jianghuan; Wang Na; Hu Binsheng. Research on FeO Content of Sinter. Int. J. Miner. Process. Extr. Metall. 2019, 4(1), 1-6. doi: 10.11648/j.ijmpem.20190401.11

Copy | Download

AMA Style

Hu Qichen, Wu Chunliang, Sun Jianghuan, Wang Na, Hu Binsheng. Research on FeO Content of Sinter. Int J Miner Process Extr Metall. 2019;4(1):1-6. doi: 10.11648/j.ijmpem.20190401.11

Copy | Download

@article{10.11648/j.ijmpem.20190401.11,
  author = {Hu Qichen and Wu Chunliang and Sun Jianghuan and Wang Na and Hu Binsheng},
  title = {Research on FeO Content of Sinter},
  journal = {International Journal of Mineral Processing and Extractive Metallurgy},
  volume = {4},
  number = {1},
  pages = {1-6},
  doi = {10.11648/j.ijmpem.20190401.11},
  url = {https://doi.org/10.11648/j.ijmpem.20190401.11},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijmpem.20190401.11},
  abstract = {The FeO content of sinter is the key role for sinter quality, carbon consumption and production cost. And it has great effect on production status, fuel ratio and hot metal output of blast furnace. According to the relevant national standards and industry standards, the particle size, reducibility, drum strength, fuel ratio of sinter and BF production status in Tangsteel iron-making plant were analyzed in this paper. It is found that the optimal range of FeO content in Tangsteel is from 8.0 to 8.5 wt. %.},
 year = {2019}
}

Copy | Download

TY  - JOUR
T1  - Research on FeO Content of Sinter
AU  - Hu Qichen
AU  - Wu Chunliang
AU  - Sun Jianghuan
AU  - Wang Na
AU  - Hu Binsheng
Y1  - 2019/02/15
PY  - 2019
N1  - https://doi.org/10.11648/j.ijmpem.20190401.11
DO  - 10.11648/j.ijmpem.20190401.11
T2  - International Journal of Mineral Processing and Extractive Metallurgy
JF  - International Journal of Mineral Processing and Extractive Metallurgy
JO  - International Journal of Mineral Processing and Extractive Metallurgy
SP  - 1
EP  - 6
PB  - Science Publishing Group
SN  - 2575-1859
UR  - https://doi.org/10.11648/j.ijmpem.20190401.11
AB  - The FeO content of sinter is the key role for sinter quality, carbon consumption and production cost. And it has great effect on production status, fuel ratio and hot metal output of blast furnace. According to the relevant national standards and industry standards, the particle size, reducibility, drum strength, fuel ratio of sinter and BF production status in Tangsteel iron-making plant were analyzed in this paper. It is found that the optimal range of FeO content in Tangsteel is from 8.0 to 8.5 wt. %.
VL  - 4
IS  - 1
ER  -

Copy | Download