For industrial, agricultural, and drinking needs in inland regions, rivers and lakes serve as the main water sources. The factors that impact water quality on a chemical, physical, and biological level are always important. The microbiological quality is crucial and must never be sacrificed in order to provide visually appealing and acceptable water. The most important water quality properties—temperature, pH, turbidity, conductivity, total dissolved solids, total suspended solids, heavy metals, chlorides, nitrates, fluorides, sulfates, bacteria, COD, BOD, DO, etc.—are basic evaluation parameters. This study aimed to review the physicochemical characteristics of water quality in selected areas of Ethiopia. The concentration of those physicochemical properties in water was compared with WHO permissible levels. As a result, turbidity, K, and Na were found beyond WHO permissible levels and the others were found within the acceptable range. Existence beyond acceptable range is a result of daily human activity, the lake closest to the city, and poor household waste management. From this study, we recommend that it is better to study water quality assessment properly and regularly. It's also suggested to create an effective waste management system and prevent the untreated discharge of industrial waste into nearby lakes and rivers. Likewise, creating and raising awareness about treating water with modern waste management technologies is also important.
Published in | Science Journal of Analytical Chemistry (Volume 11, Issue 2) |
DOI | 10.11648/j.sjac.20231102.12 |
Page(s) | 19-22 |
Creative Commons |
This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited. |
Copyright |
Copyright © The Author(s), 2023. Published by Science Publishing Group |
Ethiopia, Physicochemical, Quality, Water
[1] | Abdel-Shafy, H. I., & Kamel, A. H. (2016), Groundwater in Egypt issue: resources, location, amount, contamination, protection, renewal, future overview. Egypt J Chem, 59 (3), 321-362. |
[2] | Akhtar, N., Syakir Ishak, M. I., Bhawani, S. A., & Umar, K. (2021), Various natural and anthropogenic factors responsible for water quality degradation: A review. Water, 13 (19), 2660. |
[3] | Cabrera-Reina, A., Aliste, M., Polo-López, M. I., Malato, S., & Oller, I. (2023). Individual and combined effect of ions species and organic matter on the removal of microcontaminants by Fe3+-EDDS/solar-light activated persulfate, Water Research, 119566. |
[4] | Cairncross, S., & Feachem, R. (2018), Environmental health engineering in the tropics: Water, sanitation and disease control. Routledge. |
[5] | Cao, X., Lu, Y., Wang, C., Zhang, M., Yuan, J., Zhang, A., & Wang, Y. (2019), Hydro geochemistry and quality of surface water and groundwater in the drinking water source area of an urbanizing region, Ecotoxicology and environmental safety, 186, 109628. |
[6] | Desrosiers, C., Leflaive, J., Eulin, A., & Ten-Hage, L. (2013). Bioindicators in marine waters: benthic diatoms as a tool to assess water quality from eutrophic to oligotrophic coastal ecosystems. Ecological indicators, 32, 25-34. |
[7] | Edokpayi, J. N., Odiyo, J. O., & Durowoju, O. S. (2017), Impact of wastewater on surface water quality in developing countries: a case study of South Africa. Water quality, 10, 66561. |
[8] | Eriksson, S. (2012), Water quality in the Koga Irrigation Project, Ethiopia: A snapshot of general quality parameters. |
[9] | Getnet Taye Bawoke & Zelalem Leyew Anteneh | (2020) Spatial assessment and appraisal of groundwater suitability for drinking consumption in Andasa watershed using water quality index (WQI) and GIS techniques: Blue Nile Basin, Northwestern Ethiopia, Cogent Engineering, 7: 1, 1748950 DOI: https://doi.org/10.1080/23311916.2020.1748950 |
[10] | Gonsor, O., & Tomasik, M. (2017), Study of influence of measuring system parameters to the value of active and reactive component of the substance electrical conductivity, ECONTECHMOD: An International Quarterly Journal on Economics of Technology and Modelling Processes, 6 (1), 31-36. |
[11] | Katrivesis, F. K., Karela, A. D., Papadakis, V. G., & Paraskeva, C. A. (2019), Revisiting of coagulation-flocculation processes in the production of potable water. Journal of Water Process Engineering, 27, 193-204. |
[12] | Kerry, J. P. (2014). New packaging technologies, materials and formats for fast-moving consumer products, In Innovations in food packaging (pp. 549-584). Academic Press. |
[13] | Krenkel, P. (2012). Water quality management. Elsevier. |
[14] | Kumar, A., Bojjagani, S., Maurya, A., & Kisku, G. C. (2022), Spatial distribution of physicochemical-bacteriological parametric quality and water quality index of Gomti River, India. Environmental Monitoring and Assessment, 19 4 (3), 159. |
[15] | Mostafa, M. K., & Peters, R. W. (2016), Improve effluent water quality at Abu-Rawash wastewater treatment plant with the application of coagulants. Water and Environment Journal, 30 (1-2), 88-95. |
[16] | Naveen, B. P., Mahapatra, D. M., Sitharam, T. G., Sivapullaiah, P. V., & Ramachandra, T. V. (2017), Physico-chemical and biological characterization of urban municipal landfill leachate. Environmental Pollution, 220, 1-12. |
[17] | Oluyemi, A. (2013), Determination of water quality of selected public wells in Ekiti State, South-Western Nigeria. Scientific Journal of Environmental Sciences, 228 (1295), 1-10. |
[18] | Rahmanian, N., Ali, S. H. B., Homayoonfard, M., Ali, N. J., Rehan, M., Sadef, Y., & Nizami, A. S. (2015), Analysis of physiochemical parameters to evaluate the drinking water quality in the State of Perak, Malaysia. Journal of Chemistry, 2015, 1-10. |
[19] | Sebiawu, G. E., Fosu, S. A., & Saana, S. B. B. M. (2014), A physico-chemical and bacteriological analysis of borehole water samples from the Wa municipality of the upper west region, Ghana. International Journal of Engineering Research, 3 (5). |
[20] | Shigut, D. A., Liknew, G., Irge, D. D., & Ahmad, T. (2017), Assessment of physico-chemical quality of borehole and spring water sources supplied to Robe Town, Oromia region, Ethiopia. Applied Water Science, 7 (1), 155-164. |
[21] | Tank, D. K., & Chandel, C. S. (2010), Analysis of the major ion constituents in groundwater of Jaipur city. Nature and Science, 8 (10), 1-7. |
[22] | Tsega, N., Sahile, S., Kibret, M., & Abera, B. (2013), Bacteriological and physico-chemical quality of drinking water sources in a rural community of Ethiopia. African health sciences, 13 (4), 1156-1161. |
[23] | Unamba, C. L., Chika, E., & Isu, N. R. (2016), Physicochemical and bacteriological assessment of some borehole waters in the Federal Capital Territory, Nigeria. The International Research Journal of Public and Environmental Health, 3 (6), 140-145. |
[24] | Vasanthavigar, M., Srinivasamoorthy, K., Rajiv Ganthi, R., Vijayaraghavan, K., & Sarma, V. S. (2012), Characterisation and quality assessment of groundwater with a special emphasis on irrigation utility: Thirumanimuttar sub-basin, Tamil Nadu, India. Arabian journal of Geosciences, 5 (2), 245-258. |
[25] | WHO, 4th Edition, F. (2011), Guidelines for drinking-water quality chronicle, 38 (4), 104-8. |
[26] | WHO, G. (2011), Guidelines for drinking-water quality, World Health Organization, 216, 303-304. |
[27] | Worako, A. W. (2015), Physicochemical and biological water quality assessment of Lake Hawassa for multiple designated water uses, Journal of Urban and Environmental Engineering, 9 (2), 146-157. |
[28] | World Health Organization, (2021), Manganese in drinking water: background document for development of WHO Guidelines for drinking water quality (No. WHO/HEP/ECH/WSH/2021.5. |
[29] | World Health Organization, WHO & World Health Organization Staff (2004), Guidelines for drinking-water quality (Vol. 1). |
[30] | Yasin, M., Ketema, T., & Bacha, K. (2015), Physico-chemical and bacteriological quality of drinking water of different sources, Jimma zone, Southwest Ethiopia, BMC research notes, 8, 1-13. |
[31] | Yirdaw Meride and Bamlaku Ayenew Drinking water quality assessment and its effects on residents health in Wondo genet campus, Ethiopia, Environ Syst Res (2016) 5: 1 DOI 10.1186/s40068-016-0053-6. |
[32] | Zhang, L., & Sun, X. (2014), Changes in physical, chemical, and microbiological properties during the two-stage co-composting of green waste with spent mushroom compost and biochars, Bioresource technology, 171, 274-284. |
APA Style
Kasahun Wale, Bealu Girma. (2023). A Study on Physicochemical Properties and Water Quality in Selected Areas of Ethiopia. Science Journal of Analytical Chemistry, 11(2), 19-22. https://doi.org/10.11648/j.sjac.20231102.12
ACS Style
Kasahun Wale; Bealu Girma. A Study on Physicochemical Properties and Water Quality in Selected Areas of Ethiopia. Sci. J. Anal. Chem. 2023, 11(2), 19-22. doi: 10.11648/j.sjac.20231102.12
AMA Style
Kasahun Wale, Bealu Girma. A Study on Physicochemical Properties and Water Quality in Selected Areas of Ethiopia. Sci J Anal Chem. 2023;11(2):19-22. doi: 10.11648/j.sjac.20231102.12
@article{10.11648/j.sjac.20231102.12, author = {Kasahun Wale and Bealu Girma}, title = {A Study on Physicochemical Properties and Water Quality in Selected Areas of Ethiopia}, journal = {Science Journal of Analytical Chemistry}, volume = {11}, number = {2}, pages = {19-22}, doi = {10.11648/j.sjac.20231102.12}, url = {https://doi.org/10.11648/j.sjac.20231102.12}, eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.sjac.20231102.12}, abstract = {For industrial, agricultural, and drinking needs in inland regions, rivers and lakes serve as the main water sources. The factors that impact water quality on a chemical, physical, and biological level are always important. The microbiological quality is crucial and must never be sacrificed in order to provide visually appealing and acceptable water. The most important water quality properties—temperature, pH, turbidity, conductivity, total dissolved solids, total suspended solids, heavy metals, chlorides, nitrates, fluorides, sulfates, bacteria, COD, BOD, DO, etc.—are basic evaluation parameters. This study aimed to review the physicochemical characteristics of water quality in selected areas of Ethiopia. The concentration of those physicochemical properties in water was compared with WHO permissible levels. As a result, turbidity, K, and Na were found beyond WHO permissible levels and the others were found within the acceptable range. Existence beyond acceptable range is a result of daily human activity, the lake closest to the city, and poor household waste management. From this study, we recommend that it is better to study water quality assessment properly and regularly. It's also suggested to create an effective waste management system and prevent the untreated discharge of industrial waste into nearby lakes and rivers. Likewise, creating and raising awareness about treating water with modern waste management technologies is also important.}, year = {2023} }
TY - JOUR T1 - A Study on Physicochemical Properties and Water Quality in Selected Areas of Ethiopia AU - Kasahun Wale AU - Bealu Girma Y1 - 2023/06/20 PY - 2023 N1 - https://doi.org/10.11648/j.sjac.20231102.12 DO - 10.11648/j.sjac.20231102.12 T2 - Science Journal of Analytical Chemistry JF - Science Journal of Analytical Chemistry JO - Science Journal of Analytical Chemistry SP - 19 EP - 22 PB - Science Publishing Group SN - 2376-8053 UR - https://doi.org/10.11648/j.sjac.20231102.12 AB - For industrial, agricultural, and drinking needs in inland regions, rivers and lakes serve as the main water sources. The factors that impact water quality on a chemical, physical, and biological level are always important. The microbiological quality is crucial and must never be sacrificed in order to provide visually appealing and acceptable water. The most important water quality properties—temperature, pH, turbidity, conductivity, total dissolved solids, total suspended solids, heavy metals, chlorides, nitrates, fluorides, sulfates, bacteria, COD, BOD, DO, etc.—are basic evaluation parameters. This study aimed to review the physicochemical characteristics of water quality in selected areas of Ethiopia. The concentration of those physicochemical properties in water was compared with WHO permissible levels. As a result, turbidity, K, and Na were found beyond WHO permissible levels and the others were found within the acceptable range. Existence beyond acceptable range is a result of daily human activity, the lake closest to the city, and poor household waste management. From this study, we recommend that it is better to study water quality assessment properly and regularly. It's also suggested to create an effective waste management system and prevent the untreated discharge of industrial waste into nearby lakes and rivers. Likewise, creating and raising awareness about treating water with modern waste management technologies is also important. VL - 11 IS - 2 ER -