The Discrete Element Method (DEM) is a calculation method by which a particle flow at a single particle occurs. It is widely used in many fields such as coastal engineering, mining and civil engineering. Specifically, when small particles are taken away by water, pores will increase and collapse due to the soil's own weight, which will cause other parts of the soil to deform. Due to the continuous development of piping, small soil particles are taken away from the entrance, so the entrance is constantly expanding. Once the upper layer of soil loses the support below, the upper layer of particles will collapse under infiltration. Therefore, as the above phenomenon continues to develop, the amount and flow of water will increase. At the same time, this will increase the rate of seepage destruction. In fact, the law of particle motion includes the growth, aggregation, diffusion and crystallization of particles under different conditions, which can be applied to other fields, such as the research of material surface roughness in textile science, the crystal origin and potential self-rotation in electronic engineering, etc. The research of this paper can provide a further theoretical basis and framework for the above direction, and pave the way for the majority of scholars to carry out the follow-up research work. In this article, EDEM (Electronic Discrete Element Method) modeling is used to simulate the movement of particles during the slip.
| Published in | Science Journal of Chemistry (Volume 9, Issue 3) |
| DOI | 10.11648/j.sjc.20210903.11 |
| Page(s) | 62-67 |
| Creative Commons |
This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited. |
| Copyright |
Copyright © The Author(s), 2024. Published by Science Publishing Group |
Slip, Seepage, DEM, EDEM, Particle, Soil
| [1] | Jaffe, David A., and Brett F. Sanders. 2001. “Engineered Levee Breaches for Flood Mitigation.” Journal of Hydraulic Engineering. https://doi.org/10.1061/(asce)0733-9429(2001)127:6(471). |
| [2] | Deverel, Steven J., Sandra Bachand, Scott J. Brandenberg, Cathleen E. Jones, Jonathan P. Stewart, and Paolo Zimmaro. 2016. “Factors and Processes Affecting Delta Levee System Vulnerability.” San Francisco Estuary and Watershed Science. https://doi.org/10.15447/sfews.2016v14iss4art3. |
| [3] | Baron, O., A., Rame´, E., Wilkinson, A., 2009, DEM simulation of a schulze ring shear tester, in: AIP Conference Proceedings. pp. 409-412. |
| [4] | Hertz, H., 1881, U´ber die Beru´hrung fester elastischer Ko´rper, Journal fu´r die reine und angewandte Mathematick, 92, 156-171. |
| [5] | Lebeau M, Konrad JM. A new capillary and thin film flow model for predicting the hydraulic conductivity of unsaturated porous media. Water Resour Res 2010: 46 (12). |
| [6] | Firouzi M, Alnoaimi K, Kovscek A, Wilcox J. Klinkenberg effect on predicting and measuring helium permeability in gas shales. Int J Coal Geol 2014; 123: 62-8. |
| [7] | Zarghami A, Maghrebi MJ, Ghasemi J, Ubertini S. Lattice Boltzmann finite volume formulation with improved stability. Commun Comput Phys 2012; 12 (1): 42-64. |
| [8] | Robinson M, Ramaioli M, Luding S. Fluid-particle flow simulations using two-way-coupled mesoscale SPH-DEM and validation. Int J Multiph Flow 2014; 59: 121-34. |
| [9] | Zarghami A, Biscarini C, Succi S, Ubertini S. Hydrodynamics in porous media: a finite volume lattice Boltzmann study. J Sci Comput 2014; 59 (1): 80-103. |
| [10] | Cundall PA, Strack OD. A discrete numerical model for granular assemblies. Geotechnique 1979; 29 (1): 47-65. |
| [11] | Ning DZ, Shi J, Zou QP, Teng B. Investigation of hydrodynamic performance of an OWC (oscillating water column) wave energy device using a fully nonlinear HOBEM (higher-order boundary element method). Energy 2015; 83: 177-88. |
| [12] | Heydarabadi H, Abdolzadeh M, Lari K. Simulation of airflow and particle deposition settled over a tilted Photovoltaic module. Energy 2017; 139: 1016-29. |
| [13] | Deen N, Annaland MVS, Van der Hoef MA, Kuipers J. Review of discrete particle modelling of fluidized beds. Chem Eng Sci 2007; 62 (1-2): 28-44. |
| [14] | Tsuji T, Yabumoto K, Tanaka T. Spontaneous structures in three-dimensional bubbling gas-fluidized bed by parallel DEM-CFD coupling simulaion. Powder Technol 2008; 184 (2): 132-40. |
| [15] | Cleary PW. Industrial particle flow modelling using discrete element method. Eng Comput 2009; 26(6): 698-743. |
| [16] | Abichou T, Benson CH, Edil TB. Network model for hydraulic conductivity of sand-bentonite mixtures. Can Geotech J 2004; 41 (4): 698-712. |
| [17] | Santamarina, J. Carlos. 2003. “Soil Behavior at the Microscale: Particle Forces.” In. https://doi.org/10.1061/40659(2003)2. |
| [18] | Sato, M., and R. Kuwano. 2015. “Effect of Internal Erosion on Deformation Characteristics in the Triaxial Compression Test.” In Scour and Erosion - Proceedings of the 7th International Conference on Scour and Erosion, ICSE 2014. https://doi.org/10.1201/b17703-28. |
| [19] | Chirone, R., Raganati, F., Ammendola, P., Barletta, D., Lettieri, P., Poletto, M., 2018, A comparison between interparticle forces estimated with direct powder shear testing and with sound assisted fluidization, Powder Technology, 323, 1–7. https://doi.org/10.1016/j.powtec.2017.09.038 |
| [20] | Gröger, T., Tüzün, U., Heyes, D. M., 2003, Modelling and measuring of cohesion in wet granular materials, Powder Technology, 133, 203–215. https://doi.org/10.1016/S0032-5910(03)00093-7 |
| [21] | Israelachvili, J., 2011, Intermolecular and Surface Forces, Intermolecular and Surface Forces. https://doi.org/10.1016/C2009-0-21560-1 |
| [22] | Mindlin, R. D., Deresiewicz, H., 1989, Elastic Spheres in Contact Under Varying Oblique Forces, in: The Collected Papers of Raymond D. Mindlin Volume I. pp. 269–286. https://doi.org/10.1007/978-1-4613-8865-4_35 |
| [23] | Obermayr, M., Vrettos, C., Eberhard, P., Däuwel, T., 2014, A discrete element model and its experimental validation for the prediction of draft forces in cohesive soil, Journal of Terramechanics, 53, 93–104.https://doi.org/10.1016/j.jterra.2014.04.003 |
| [24] | Zhang, R., Li, J., 2006, Simulation on mechanical behavior of cohesive soil by Distinct Element Method, in:Journal of Terramechanics. pp. 303–316. https://doi.org/10.1016/j.jterra.2005.05.006 |
| [25] | Ma, Dan, Xiexing Miao, Haibo Bai, Hai Pu, Zhanqing Chen, Jiangfeng Liu, Yanhua Huang, Guimin Zhang, and Qi Zhang. 2016. “Impact of Particle Transfer on Flow Properties of Crushed Mudstones.” Environmental Earth Sciences. https://doi.org/10.1007/s12665-016-5382-2. |
| [26] | Liang, Y., C. Zeng, J. J. Wang, M. W. Liu, T. C. Jim Yeh, and Y. Y. Zha. 2017. “Constant Gradient Erosion Apparatus for Appraisal of Piping Behavior in Upward Seepage Flow.” Geotechnical Testing Journal. https://doi.org/10.1520/GTJ20150282. |
| [27] | Jiang, Xiangang, Anders Wörman, Pengshuai Chen, Qin Huang, and Huayong Chen. 2020. “Mechanism of the Progressive Failure of Non-Cohesive Natural Dam Slopes.” Geomorphology. https://doi.org/10.1016/j.geomorph.2020.107198. |
| [28] | Yang, Bin, Tianhong Yang, Zenghe Xu, Honglei Liu, Xin Yang, and Wenhao Shi. 2019. “Impact of Particle-Size Distribution on Flow Properties of a Packed Column.” Journal of Hydrologic Engineering. https://doi.org/10.1061/(asce)he.1943-5584.0001735. |
| [29] | Fox, G. A., M. L. Chu-Agor, R. M. Cancienne, and G. V. Wilson. 2008. “Seepage Erosion Mechanisms of Bank Collapse: Three-Dimensional Seepage Particle Mobilization and Undercutting.” In World Environmental and Water Resources Congress 2008: Ahupua’a - Proceedings of the World Environmental and Water Resources Congress 2008. https://doi.org/10.1061/40976(316)292. |
| [30] | Okeke, Austin Chukwueloka Udechukwu, and Fawu Wang. 2016. “Critical Hydraulic Gradients for Seepage-Induced Failure of Landslide Dams.” Geoenvironmental Disasters. https://doi.org/10.1186/s40677-016-0043-z. |
APA Style
Lin Zhong. (2021). DEM Modelling of Particle Movement During Seepage Failure. Science Journal of Chemistry, 9(3), 62-67. https://doi.org/10.11648/j.sjc.20210903.11
ACS Style
Lin Zhong. DEM Modelling of Particle Movement During Seepage Failure. Sci. J. Chem. 2021, 9(3), 62-67. doi: 10.11648/j.sjc.20210903.11
AMA Style
Lin Zhong. DEM Modelling of Particle Movement During Seepage Failure. Sci J Chem. 2021;9(3):62-67. doi: 10.11648/j.sjc.20210903.11
Share This Article
Twitter
Linked In
Facebook
Copy
Download@article{10.11648/j.sjc.20210903.11,
author = {Lin Zhong},
title = {DEM Modelling of Particle Movement During Seepage Failure},
journal = {Science Journal of Chemistry},
volume = {9},
number = {3},
pages = {62-67},
doi = {10.11648/j.sjc.20210903.11},
url = {https://doi.org/10.11648/j.sjc.20210903.11},
eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.sjc.20210903.11},
abstract = {The Discrete Element Method (DEM) is a calculation method by which a particle flow at a single particle occurs. It is widely used in many fields such as coastal engineering, mining and civil engineering. Specifically, when small particles are taken away by water, pores will increase and collapse due to the soil's own weight, which will cause other parts of the soil to deform. Due to the continuous development of piping, small soil particles are taken away from the entrance, so the entrance is constantly expanding. Once the upper layer of soil loses the support below, the upper layer of particles will collapse under infiltration. Therefore, as the above phenomenon continues to develop, the amount and flow of water will increase. At the same time, this will increase the rate of seepage destruction. In fact, the law of particle motion includes the growth, aggregation, diffusion and crystallization of particles under different conditions, which can be applied to other fields, such as the research of material surface roughness in textile science, the crystal origin and potential self-rotation in electronic engineering, etc. The research of this paper can provide a further theoretical basis and framework for the above direction, and pave the way for the majority of scholars to carry out the follow-up research work. In this article, EDEM (Electronic Discrete Element Method) modeling is used to simulate the movement of particles during the slip.},
year = {2021}
}
TY - JOUR T1 - DEM Modelling of Particle Movement During Seepage Failure AU - Lin Zhong Y1 - 2021/05/14 PY - 2021 N1 - https://doi.org/10.11648/j.sjc.20210903.11 DO - 10.11648/j.sjc.20210903.11 T2 - Science Journal of Chemistry JF - Science Journal of Chemistry JO - Science Journal of Chemistry SP - 62 EP - 67 PB - Science Publishing Group SN - 2330-099X UR - https://doi.org/10.11648/j.sjc.20210903.11 AB - The Discrete Element Method (DEM) is a calculation method by which a particle flow at a single particle occurs. It is widely used in many fields such as coastal engineering, mining and civil engineering. Specifically, when small particles are taken away by water, pores will increase and collapse due to the soil's own weight, which will cause other parts of the soil to deform. Due to the continuous development of piping, small soil particles are taken away from the entrance, so the entrance is constantly expanding. Once the upper layer of soil loses the support below, the upper layer of particles will collapse under infiltration. Therefore, as the above phenomenon continues to develop, the amount and flow of water will increase. At the same time, this will increase the rate of seepage destruction. In fact, the law of particle motion includes the growth, aggregation, diffusion and crystallization of particles under different conditions, which can be applied to other fields, such as the research of material surface roughness in textile science, the crystal origin and potential self-rotation in electronic engineering, etc. The research of this paper can provide a further theoretical basis and framework for the above direction, and pave the way for the majority of scholars to carry out the follow-up research work. In this article, EDEM (Electronic Discrete Element Method) modeling is used to simulate the movement of particles during the slip. VL - 9 IS - 3 ER -
Information
Email: